Draw Guide 7.6
Chapter 5, Combining Multiple Objects
This document is Copyright © 2023 by the LibreOffice Documentation Team. Contributors are listed below. This document maybe distributed and/or modified under the terms of either the GNU General Public License (https://www.gnu.org/licenses/gpl.html), version 3 or later, or the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), version 4.0 or later. All trademarks within this guide belong to their legitimate owners.
Contributors for this edition:
Peter Schofield
Contributors for previous editions:
Claire Wood
Hazel Russman
Jean Hollis Weber
John A Smith
John Cleland
Kees Kriek
Martin Fox
Peter Schofield
Winston Min Tjong
Please direct any comments or suggestions about this document to the Documentation Team mailing list: loguides@community.documentfoundation.org.
Note
Everything sent to a mailing list, including email addresses and any other personal information that is written in the message, is publicly archived and cannot be deleted.
Published November 2023. Based on LibreOffice 7.6 Community.Other versions of LibreOffice may differ in appearance and functionality.
Some keystrokes and menu items are different on macOS from those used in Windows and Linux. The table below gives some common substitutions used in this document. For a detailed list, see LibreOffice Help.
|
Windows or Linux |
macOS equivalent |
Effect |
|
Tools > Options |
LibreOffice > Preferences |
Access setup options |
|
Right-click |
Control+click, Ctrl+click, or right-click depending on computer setup |
Open a context menu |
|
Ctrl or Control |
⌘ and/or Cmd or Command, depending on keyboard |
|
|
Alt |
⌥ and/or Alt or Option depending on keyboard |
Used with other keys |
|
F11 |
⌘+T |
Open the Styles deck in the Sidebar |
Grouping of objects is similar to placing objects into a container. Objects within a group are moved together as one object and any changes made are applied globally to the objects within the group. A group can be ungrouped and the objects that make up the group can be manipulated separately.
A temporary grouping is when several objects are selected together. Any changes to object parameters are applied to all of the objects within the temporary group. For example, a temporary group of objects can be rotated in its entirety and is created using one of the following methods:
Click and drag the cursor over several objects surrounding the objects with a selection rectangle. This selection rectangle is also known as a marquee. Release the cursor when all the objects required for a temporary group are selected.
Click the first object, then hold down the Shift key and click on the remaining objects for the temporary group.
To cancel a temporary group of objects, simply click outside of the selection handles displayed around the objects.
When objects are grouped, any editing carried out on a group are applied to all objects within the group. Click on one object in a group selects the whole group. Objects within a group retain their individual properties and can be edited independently. See “Editing individual group objects” on page 1 for more information.
1) Select objects for a group using one of the following methods. Selection handles appear around all objects selected for the group (Figure 1).
Click on each object required while holding down the Shift key.
Make sure Select on the Drawing toolbar is selected and draw a selection rectangle around the objects required for the group using the cursor.
To select all the objects in a drawing, go to Edit > Select All on the Menu bar, or use the keyboard shortcut Ctrl+A (macOS ⌘+A).
2) Create a group of selected objects using one of the following methods:
Right-click on an object within the selected group and select Group from the context menu.
Go to Shape > Group > Group on the Menu bar.
Use the keyboard shortcut Ctrl+Shift+G (macOS ⌘+Shift+G).
1) Select a group of objects and selection handles appear around objects within the group (Figure 1).
2) Ungroup a group of objects using one of the following methods:
Right-click on the selected group and select Ungroup from the context menu.
Go to Shape > Group > Ungroup on the Menu bar.
Use the keyboard shortcut Ctrl+Alt+Shift+G (macOS ⌘+⌥+Shift+G).
Figure 1: Example of grouping objects
Figure 2: Example of editing individual objects in a group.
An object within a group can be edited individually without ungrouping the objects.
1) Select a group, then enter the group using one of the following methods.
Right-click on the group and select Enter Group from the context menu.
Go to Shape > Group > Enter Group on the Menu bar.
Use the keyboard shortcut F3.
Double-click on the selected group.
2) Click on an object to select and individually edit it, as shown by the example in Figure 2.
Note
After entering a group, any other objects outside the group cannot be selected for editing until exiting from the selected group.
3) After editing and saving changes to an individual object within a group, exit the group using one of the following methods:
Right-click on the group and select Exit Group from the context menu.
Go to Shape > Group > Exit Group on the Menu bar.
Use the keyboard combination Ctrl+F3 (macOS ⌘+F3).
Double-click outside the group.
A group of groups can be created and this is commonly known as nesting groups. When nested groups are created, Draw retains individual group hierarchy and remembers the order in which groups were selected. That means, the last individual group selected is on top of all the other groups within a nested group. Ungrouping and entering a nested group works in exactly the same way as for individual groups.
Tip
If group and ungroup commands are regularly used, or any other command, tools can be added to a toolbar. See Appendix B, Toolbars and the Getting Started Guide for more information on customizing toolbars.
Combining objects is a permanent merging of objects creating a new object. The original objects are no longer available as individual objects and cannot be edited as individual objects.
1) Select several objects that are overlapping each other.
2) Combine the selected objects into a single object using one of the following methods:
Right-click on the selection and select Shapes > Combine from the context menu.
Go to Shape > Combine on the Menu bar.
Use the keyboard combination Ctrl+Shift+K (macOS ⌘+Shift+K).
At first glance, the results can seem rather surprising, but the following explains how combining objects works.
The attributes (for example, area fill) of the resulting object are those of the object furthest back. In Figure 3, it is the ellipse and in Figure 4 it is the yellow rectangle.
Where objects overlap, the overlapping zone is either filled or empty depending on whether the overlap is even numbered or odd numbered. Figure 4 shows where the overlap number is even, an empty space is created and where the overlap number is odd, a filled area is created.
Figure 3: Example of area fill on combined objects
Overlapping individual objects
Combined overlapping objects
Figure 4: Example of area fill on combined objects
Overlapping individual objects
Combined overlapping objects
Figure 5: Example of splitting combined objects
Overlapping objects before combining
Split result of combined overlapping objects
An object which has been created from combining several objects can be split into individual objects. However, the original objects retain the formatting of the combined object and do not revert back to their original formatting. Select the combined object and use one of the following methods to split the combined object:
Go to Shape > Split on the Menu bar.
Use the keyboard shortcut Ctrl+Alt+Shift+K (macOS ⌘+⌥+Shift+K).
In Figure 5, the left graphic is the original example of overlapping area fills before combining. The right graphic is the result of splitting the combined object. The individual overlapping objects have taken the formatting of the object (Rectangle 1) at the rear of the overlapping objects.
An object that consists of more than one part can be broken into its individual parts as follows. For example, a star is broken into separate lines and the area fill is lost, as shown by the center graphic in Figure 6.
1) Select an object that consists of more than one part.
2) Convert the object to a curve or polygon using one of the following methods:
Go to Shape > Convert > To Curve or To Polygon on the Menu bar.
Right-click on the object and select Convert > To Curve or To Polygon on the context menu.
3) Go to Shape > Break on the Menu bar and the object is broken into individual parts.
4) Move, format or delete the individual parts as necessary, as shown by the right object in Figure 6.
The individual parts of an object or individual objects can be connected together as follows:
1) Select all the objects that are going to be connected.
2) Go to Shape > Connect on the Menu bar. Individual lines or lines in a border are converted to curves and the end points of each line connected.
Note
The shape created when connecting individual parts or lines is not a closed shape. The new shape has to be closed to create an area fill.
Closing objects creates an object that uses an area fill.
1) Select an object that has a gap in its border.
2) Right-click on the selected object and select Close Object from the context menu to close the gap.
3) Format the area fill created to requirements. See Chapter 4, Changing Object Attributes for more information on working with area fills.
After selecting more than one object, the merge, subtract, and intersect functions become available allowing creation of a new object with a new shape.
When merging objects, a new object is created with a shape that follows the shape of the merged objects. The area fill of the merged object is determined by the area fill of the object that is at the rear of all the other objects, as shown in Figure 7.
After selecting several objects, use one of the following methods to merge the objects:
Go to Shape > Merge on the Menu bar.
Right-click on the selected objects and select Shapes > Merge from the context menu.
When subtracting objects, the objects at the front are subtracted from the object behind. This leaves a blank space the subtracted objects occupied creating a new shape, as shown in Figure 8. After selecting several objects that overlap each other, use one of the following methods to subtract objects:
Go to Shape > Subtract on the Menu bar.
Right-click on the selected objects and select Shapes > Subtract from the context menu.
Figure 7: Example of merging objects
Figure 8: Example 0f subtracting objects
Figure 9: Example of intersecting objects
When intersecting objects, the front objects and the exposed area of the rear object are removed. This creates a new object from the area of the rear object that was covered by the front objects, as shown in Figure 9. After selecting several objects that overlap each other, use one of the following methods to intersect objects:
Go to Shape > Intersect on the Menu bar.
Right-click on the selected objects and select Shapes > Intersect from the context menu.
The following example shows how to use the merge, subtract, and intersect functions to create a knife with a handle.
1) Draw an ellipse and then a rectangle overlapping half of the ellipse width.
2) Select both shapes and select Shapes > Subtract on the Menu bar.
3) Draw another rectangle and put it over the top half of the ellipse.
4) Select both shapes and select Shapes > Subtract on the Menu bar.
5) Draw a small ellipse covering just the lower right corner.
6) Select both shapes and select Shapes > Subtract on the Menu bar. The knife blade shape is now complete.
7) To make the handle, draw a rectangle and an ellipse.
8) Merge the shapes together.
9) Position the handle on the blade. Select the handle and blade, then group together to create a drawing of the knife.
Duplication makes copies of an object while applying a set of changes to the duplicate copies, such as color or rotation.
Figure 10: Duplicate dialog
Figure 11: Example of duplication
1) Select an object or group of objects, then use one of the following methods to open the Duplicate dialog (Figure 10):
Go to Edit > Duplicate on the Menu bar.
Go to Shape > Duplicate on the Menu bar.
Use the keyboard shortcut Shift+F3.
2) Select the number of copies, placement, enlargement, and the start and end colors for the duplicate copies.
3) Click OK and duplicate copies are created. An example of a duplication is shown in Figure 11. Each duplicate object is a separate object.
4) To group the duplicate objects into one group, see “Grouping objects”.
5) To combine the duplicate objects into one object, see “Combining, splitting, breaking, and connecting”.
The following options are available when using the Duplicate dialog:
Number of copies
Placement
X axis
Enter the horizontal distance between the centers of the selected object and the duplicate objects. Positive values shift the duplicate object to the right and negative values shift the duplicate object to the left.
Y axis
Enter the vertical distance between the centers of the selected object and the duplicate objects. Positive values shift the duplicate object down and negative values shift the duplicate object up.
Angle
Enter the angle (0 to 359 degrees) required for rotating the duplicate object. Positive values rotate the duplicate objects in a clockwise direction and negative values in a counterclockwise direction.
Enlargement
Width
Enter the amount to enlarge or reduce the width of the duplicate objects.
Height
Enter the amount to enlarge or reduce the height of the duplicate objects.
Colors
Start
Select a color for the selected object.
End
Select a color for the duplicate object. If making more than one copy, this color is applied to the last copy.
Cross-fading transforms one object shape into another object shape. The result is a new group of individual objects that includes the start and end objects. The intermediate steps show the transformation from one object shape to another object shape. The cross-fading is carried out from the first object selected to the second object selected.
1) Select two objects and go to Shape > Cross-fading on the Menu bar to open the Cross‑fading dialog (Figure 12).
2) In Settings, select the number of Increments for the transformation.
3) If necessary, in Settings, select Cross-fade attributes and Same orientation.
4) Click OK to cross-fade the selected objects and close the Cross-fading dialog. An example of cross-fading is shown in Figure 13 with Same orientation deselected. The object created is a group of objects.
5) To ungroup this group of objects and use the individual objects, see “Ungrouping”
The following options are available in the Cross-fading dialog:
Increments
Figure 12: Cross-fading dialog
Figure 13: Example of cross-fading objects
Cross-fade attributes
Same orientation
When combining, merging, subtracting, or intersecting objects, the end result varies depending on which object is at the front and which object is at the back. Each new object placed on a drawing automatically becomes the front object and all the other objects move backwards in positioning order. Arranging objects changes the order of a group of objects.
To change the arrangement position of an object, select one or more objects and then use one of the following methods
Right-click on the selected object(s), then select Arrange from the context menu and one of the available options.
Click on the triangle ▼ to the right of Arrange on the Standard toolbar to open the Position sub-toolbar (Figure 14) and select one of the available tools.
Click one of the arrangement tools on the Line and Filling toolbar.
Click on Shape > Arrange on the Menu bar and select an arrangement option.
Use the Arrange tools in Position and Size panel in the Properties deck on the Sidebar.
Use a keyboard shortcut available for each arrange option.
The arrangement options available are as follows:
Bring to Front
Bring Forward
Figure 14: Position sub-toolbar
Figure 15: Align Objects toolbar
Send Backward
Send to Back
In Front of Object
Behind Object
Reverse
To make a drawing look more professional, objects can be aligned with each other. Select one or more objects and use one of the following methods to align objects:
Right-click on the selected object(s), then select Align Objects from the context menu and one of the available options.
Click on one of the alignment tools on the Line and Filling toolbar.
Go to Shape > Align Objects on the Menu bar and select the alignment required.
Use the Align tools in the Position and Size panel in the Properties deck on the Sidebar.
Go to View > Toolbars on the Menu bar and select Align Objects to open the Align Objects toolbar (Figure 15).
The alignment tools available are as follows:
Left
Centered
Right
Top
Center
Bottom
Distributing objects allows three or more objects to be evenly spaced along a horizontal or vertical axis. Objects are distributed using the outermost objects as base points for spacing. Select at least three objects, then use one of the following methods to distribute the objects:
Right-click on the selected objects, then select Distribute Selection from the context menu and one of the available options.
Go to View > Toolbars on the Menu bar and select Distribute Selection to open the Distribute Selection toolbar (Figure 16).
Go to Shape > Distribute Selection on the Menu bar and select a distribution option.
Right-click on the selected objects and select Distribute Selection from the context menu, then select a distribution option.
The distribution options available are as follow:
Horizontal Left
Horizontal Center
Horizontal Spacing
Horizontal Right
Vertical Top
Vertical Center
Figure 16: Distribute Selection toolbar
Vertical Spacing
Vertical Bottom
