LibreOfficeLogo

Getting Started Guide 7.4

Chapter 6,
Getting Started with Impress

Presentations in LibreOffice

Copyright

This document is Copyright © 2022 by the LibreOffice Documentation Team. Contributors are listed below. You may distribute it and/or modify it under the terms of either the GNU General Public License (https://www.gnu.org/licenses/gpl.html), version 3 or later, or the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), version 4.0 or later.

All trademarks within this guide belong to their legitimate owners.

Contributors

To this edition

Skip Masonsmith

Kees Kriek

 

To previous editions

Dave Barton

Amanda M Labby

Jorge Rodríguez

Jean Hollis Weber

Drew Jensen

Peter Schofield

Hazel Russman

Claire Wood

Kevin O’Brien

Ron Faile Jr.

Olivier Hallot

Kees Kriek

Feedback

Please direct any comments or suggestions about this document to the Documentation Team’s forum at https://community.documentfoundation.org/c/documentation/loguides/ (registration is required) or send an email to: loguides@community.documentfoundation.org.

Note

Everything sent to a mailing list, including email addresses and any other personal information that is written in the message, is publicly archived and cannot be deleted.

Publication date and software version

Published January 2023. Based on LibreOffice 7.4 Community.
Other versions of LibreOffice may differ in appearance and functionality.

Using LibreOffice on macOS

Some keystrokes and menu items are different on macOS from those used in Windows and Linux. The table below gives some common substitutions for the instructions in this document. For a detailed list, see the application Help.

Windows or Linux

macOS equivalent

Effect

Tools > Options
menu selection

LibreOffice > Preferences

Access setup options

Right-click

Control+click or right-click depending on computer setup

Open a context menu

Ctrl (Control)

(Command)

Used with other keys

Alt

⌥ (Option) or Alt, depending on keyboard

Used with other keys

F11

+T

Open Styles deck in Sidebar

What is Impress?

Impress is the presentation (slide show) program included in LibreOffice. Impress creates presentations in the Open Document Presentation (ODP) format, which can be opened by other presentation software or can be exported in different presentation formats.

Slides can be created that contain many different elements, including text, bulleted and numbered lists, tables, charts, and a wide range of graphic objects such as clip art, drawings, and photographs. Impress also includes a spelling checker, a thesaurus, text styles, and background styles.

This chapter introduces some features of Impress and does not attempt to cover all of the features available in Impress that can be used to create presentations. See the Impress Guide and LibreOffice Help for more information.

To use Impress for more than very simple presentations requires some knowledge of the elements which the slides contain. Slides containing text use styles to determine the appearance of that text. Creating drawings in Impress is similar to the Draw module included in LibreOffice. For more information, refer to Chapter 4, Working with Styles, Templates, and Hyperlinks, and Chapter 7, Getting Started with Draw, in this guide. It is recommended to consult the Draw Guide for more details on how to use the drawing tools.

Starting Impress

Start Impress using any of the methods described in Chapter 1, LibreOffice Basics. The main Impress window opens and, by default, the Select a Template dialog (Figure 1) is displayed.

Templates included with Impress are designed to fit the two standard sizes of presentation slides: 4:3 and 16:9 ratios. However, templates will adapt to other available sizes, which can be selected by going to Slide > Slide Properties > Paper Format on the Menu bar or Format in the Slide panel in the Properties deck on the Sidebar.

Figure 1: Select a Template dialog

Image30

Tip

To start Impress without the Select a Template dialog, deselect Show this dialog box at startup in the lower left of the dialog.

In Windows or Linux, go to Tools > Options > LibreOffice Impress > General on the Menu bar and deselect Start with Template Selection under New Document.

In macOS, go to LibreOffice > Preferences > LibreOffice Impress > General on the Menu bar and deselect Start with Template Selection under New Document.

Main Impress window

The main Impress window (Figure Error: Reference source not found) has three main sections: Slides pane, Workspace, and Sidebar. At the top is the Menu bar and toolbars. Toolbars can be displayed, hidden, locked in position, or floating during the creation of a presentation.

Figure 2: Impress main window

Image10

Tip

The Slides pane and/or Sidebar can be closed by clicking the X in the upper right corner of each pane, or go to View > Slide Pane or View > Sidebar on the Menu bar to deselect. To reopen a pane, select View > Slide Pane or View > Sidebar on the Menu bar.

Tip

To maximize the Workspace area, click on the Hide/Show marker in the middle of the vertical separator line (highlighted in Figure Error: Reference source not found). Using the Hide/Show marker hides, but does not close, the Slides pane or Sidebar. To restore a pane, click again on its Hide/Show marker.

Menu bar

The Impress Menu bar, at the top of the main window, provides several menus common to all LibreOffice modules. The commands may differ between each LibreOffice module for File, Edit, View, Insert, Format, Tools, Window, and Help. Impress has two extra menus for Slide and Slide Show. When a menu item is selected, a submenu drops down to show commands. The Menu bar can be customized; see Chapter 13, Customizing LibreOffice.

Workspace

The Workspace (normally the center of the main window) opens in Normal view. It has four standard views of Normal, Outline, Notes, and Slide Sorter. For more information, see “Workspace views” on page 1.

If master slides are being used, then master views become available: Master Slide, Master Notes and Master Handout. There are no tabs for master views, which are selected by going to View on the Menu bar. For more information on master slides, see the Impress Guide.

Slides pane

The Slides pane contains thumbnail images of slides in a presentation in the order in which the slides are shown. Clicking on a slide image in the Slides pane selects it and places the slide in the Workspace where changes are made to the displayed slide.

Several additional operations can be carried out on one or more slides in the Slides pane. Also, these additional operations are available from a context menu when right-clicking on a slide in the Slides pane.

Also, the following operations can be carried out, although there are more efficient methods than using the Slides pane:

Sidebar

The Impress Sidebar, normally located on the right side of the Workspace, is similar to the Sidebar in the other LibreOffice modules. It consists of seven decks, as described below. To open a deck, use one of the following methods:

Properties

The Properties deck has ten panels, allowing the slide layout to be changed and the formatting of any objects on a slide.

Styles

On the Styles deck, drawing and presentation styles can be applied to a selected object, new styles created for drawing and presentation, and both types of styles can be modified. When saving changes to a style, the changes are applied to all of the elements formatted with that style in the presentation. For more information on styles, see “Styles” on page 1 and the Impress Guide.

Gallery

On the Gallery deck, an object can be inserted into a presentation either as a copy or as a link. A copy of an object is independent of the original object. Changes to the original object have no effect on the copy. A link remains dependent on the original object. Changes to the original object are also reflected in the link. See the Impress Guide for more information.

Navigator

The Navigator deck displays all objects contained in a presentation. It provides a convenient way to move between slides in a presentation or select an object on a slide. It is recommended to give slides and objects in a presentation meaningful names so that they are easily identified when using the Navigator. For more information, see “Navigator” on page 1 and the Impress Guide.

Shapes

The Shapes deck provides panels quick selection of most items that are available on the Drawing toolbar: Lines and Arrows, Curves and Polygons, Connectors, Basic Shapes, Symbol Shapes, Block Arrows, Flowchart, Callout Shapes, Stars and Banners, and 3D Objects.

Slide transition

The Slide Transition deck provides a selection of slide transitions available in Impress, also controls to adjust transition speed, automatic or manual transition, and how long a selected slide is shown (automatic transition only). For more information on transitions, see “Slide transition” on page 1 and the Impress Guide.

Animation

The Animation deck provides an easy way to add, change, or remove animations to different elements or objects on a slide and how they appear during a slide show. For more information on animation, see “Animation effects” on page 1 and the Impress Guide.

Master slides

Using the Master Slides deck, the slide design can be selected for a presentation. Impress includes several designs of master slides. The default master slide is blank, but the remaining master slides have backgrounds and styled text. For more information on master slides, see “Working with master slides” on page 1 and the Impress Guide.

Rulers

Rulers are positioned on the upper and left-hand sides of the Workspace. If they are not visible, go to View > Rulers on the Menu bar. The rulers show the size of a selected object on the slide using double lines (highlighted in Figure 3). Rulers are also used to manage object handles and guide lines when positioning objects.

To change the measurement units of the rulers, right-click on a ruler and select the measurement unit from the drop-down list, as shown in Figure 4 for the horizontal ruler. The horizontal and vertical rulers can be set to different measurement units.

The page margins in the drawing area are also represented on the rulers. The margins can be changed directly on the rulers by dragging them with the mouse. The margin area is indicated by either a grayed out area on the rulers or borders around the unused area of the ruler. This margin indication depends on computer setup and operating system.

Figure 3: Rulers showing object size

Image4

Figure 4: Changing ruler units

Image50

Note

The sizes are given in the current measurement unit and might not be the same as the ruler units. The measurement unit on the Status bar is defined in Tools > Options > LibreOffice Impress > General.

Status bar

The Status bar (Figure 5), located at the bottom of the Impress window, contains information that may be useful when working on a presentation. Several of the fields are the same as those in other components of LibreOffice. Some Impress-specific fields are described briefly below.

For details on the contents and use of these fields, see Chapter 1, LibreOffice Basics, in this guide and the Impress Guide. To hide the Status bar, go to View on the Menu bar and deselect Status Bar.

Figure 5: Status bar

Image5

Slide number

The slide number currently displayed in the Workspace and the total number of slides in the presentation.

Information area

This changes depending on the object selected on the slide. Examples are shown in Table 1.

Table 1: Examples of information

Example selection

Examples of information shown

Text area

Text Edit: Paragraph x, Row y, Column z

Charts, spreadsheets

Embedded object (OLE) “ObjectName” selected

Graphics

Bitmap with transparency selected

Master slide name

The master slide associated with the slide or notes page displayed in the Workspace. Right-click to pop up a list of available master slides and select one to apply it to the selected slide. Double-click to open the Available Master Slides dialog. For more information on master slides, see “Working with master slides” on page 1 and the Impress Guide.

Cursor position/Object size

Shows different information depending on whether objects are selected or not.

Unsaved changes

Indicates if there are any unsaved changes in the presentation. Clicking this icon saves the document. If the presentation has not been saved before, the Save As dialog opens giving the opportunity to save the presentation.

Digital signatures

Indicates if the presentation has a digital signature.

Text language

Indicates the language used for any text on a presentation.

Fit slide

When this icon is clicked on, the slide in the workspace zooms to fit in the Workspace.

Zoom slider

When moved, the slide changes its viewing zoom in the Workspace.

Zoom percentage

Indicates the zoom level of the slide displayed in the Workspace. Clicking on zoom percentage opens the Zoom & View Layout dialog where the settings for zoom factor and view layout are adjusted.

Navigator

The Navigator displays all objects contained in a presentation. It provides another convenient way to move around a presentation and find items in it.

To open the Navigator dialog (Figure 6) go to View > Navigator on the Menu bar, or use the keyboard shortcut Ctrl+Shift+F5 (macOS ⌘+Shift+F5). Alternatively, click on Navigator in the Sidebar to open the Navigator deck that is similar in appearance and function as the Navigator dialog.

Figure 6: Navigator dialog

Image32

The Navigator is more useful if slides and objects (pictures, spreadsheets, and so on) are given meaningful names, instead of leaving them with default names, such as “Slide 1” and “Shape 1” and so on (as shown in Figure 6). Using meaningful names allows for a slide or object to be easily located in a presentation.

Toolbars

Many toolbars can be used during slide creation. To display or hide the various toolbars in Impress, go to View > Toolbars on the Menu bar and select the required toolbar in the submenu that appears. For example, the Standard and Drawing toolbars are displayed by default, but the Line and Filling, and Text Formatting toolbars are not shown. For more information on toolbars and how to use them, see Chapter 1, LibreOffice Basics, and the Impress Guide.

Note

The icons used on toolbars vary depending on the computer operating system and the selection of icon size and style in Tools > Options > LibreOffice > View.

Workspace views

The Impress workspace has four standard views selected using tabs: Normal, Outline, Notes, and Slide Sorter. These tabs are normally displayed the top of the Workspace. If the tabs are not displayed, then go to View > Views Tab Bar on the Menu bar. Also, different workspace views can be selected by going to View on the Menu bar and selecting a view in the submenu. Each of the workspace views is designed to ease the completion of certain tasks.

Master views only become available in the Workspace when Master Slide, Master Notes or Master Handout are selected. There are no tabs for master views and can only be selected by going to View on the Menu bar.

Note

Each workspace view displays a different set of toolbars when selected. To customize these toolbar sets, go to View > Toolbars on the Menu bar, then check or uncheck the toolbars to add or remove.

Normal view

Normal view is the main standard view for creating individual slides in a presentation. In Normal view slides are designed, text or graphics added and formatted, and any animation effects added to text or graphics.

To place a slide in Normal view of the Workspace, either click on the slide thumbnail in the Slide Pane or click on the slide name in the Navigator.

Outline view

Outline view (Figure 7) contains all the slides of the presentation in their numbered sequence. It shows topic titles, bulleted lists, and numbered lists for each slide in outline format. Only the text contained in the default text boxes in each slide is shown. If you have added text boxes or graphic objects to the slides, then these objects are not displayed. Slide names are not included.

Figure 7: Example of Outline view in Workspace

Image34

Figure 8: Outline toolbar

Image6

Notes view

Use Notes view (Figure 9) to add notes to a slide. These notes are not seen when the presentation is shown to an audience using an external display connected to a computer. Click on the words Click to add Notes and begin typing.

The Click to add notes text box can be resized using the resizing handles which appear when the edge of the notes box is selected. Move or change the size of the box by clicking and dragging on the box border.

Figure 9: Example Notes in Workspace

Image7

When text is inserted in the Click to add notes text box, it is automatically formatted using the predefined Notes style in Presentation Styles in the Styles deck on the Sidebar. The Notes style can be formatted to the presentation requirements. For more information on editing styles, see Chapter 4, Working with Styles, Templates and Hyperlinks, in this guide and the Impress Guide.

Slide sorter view

Slide Sorter view (Figure 10) contains all the thumbnails of slides used in a presentation. Use this view to work with one slide or a group of slides.

Customizing Slide Sorter view

To change the number of slides per row in Slide Sorter view:

1)  Go to View > Toolbars > Slide View on the Menu bar to show the Slide View toolbar (Figure 11).

2)  Adjust the number of slides, up to a maximum of 15, in the Slides per Row box.

Changing slide order

To change the slide order of one or a group of slides in a presentation using Slide Sorter view:

1)  Select a slide or a group of slides.

2)  Drag and drop the slide or group of slides at the location required.

Selecting a group of slides

To select a group of slides, use one of these methods:

Figure 10: Example of Slide Sorter view in Workspace

Image8

Figure 11: Slide View toolbar

Image9

Working in Slide Sorter view

Working with slides in Slide Sorter view is similar to working with slides in the Slide Pane. To make changes, right-click on a slide in Slide Sorter view and choose one of the following in the context menu:

Creating presentations

By default, Impress opens with the Select a Template dialog displayed to select a template for a new presentation. To create a new presentation without a template, click on Cancel in the Select a Template dialog and a blank slide opens in the Workspace and Slides pane. For more information on creating presentations, slide show options, and presentation settings, see the Impress Guide.

Tip

The first thing to do is decide on the purpose of a presentation and plan accordingly. Having an idea of the audience type, the structure, the content, and how the presentation will be delivered, will save a lot of time from the start.

New presentation

When creating a new presentation, Impress shows only one slide in the Slides pane and Workspace.

Inserting new slide

To insert a new slide into a presentation, use one of the following methods.

Figure 12: Presentation toolbar

Image3

Note

A new slide is inserted after the selected slide in the presentation. If a slide is not selected, then the new slide is inserted as the last slide in the presentation.

Duplicating slides

To duplicate a slide, select a slide for duplication in the Slides pane and use one of the following methods. A duplicate slide is inserted after the selected slide in the presentation.

Slide format

Click on Properties on the Sidebar and open the Slide panel (Figure 13) to display the format options available for a presentation. The Slide panel allows for quick formatting of all slides included in a presentation and selecting master slides for a presentation. For more information on formatting slides and using master slides, see the Impress Guide.

Slide layout

By default in Impress, the Title Slide layout is used for the first slide when a new presentation is created. The layouts included in Impress range from a blank slide to a slide with six contents boxes and a title. For more information on slide layouts and slide contents, see the Impress Guide.

Figure 13: Slide and Layouts panels in Properties deck on Sidebar

Image41

The first slide in a presentation is normally a title slide. The layouts Title Slide, which also contains a section for a subtitle, or Title Only are the most suitable layouts for the first slide in a presentation. For the remaining slides, select the most suitable layout to use for the slide contents.

Impress does not have the functionality to create custom layouts. However, the different elements in a slide layout can be resized and moved. For more information, see the Impress Guide.

Selecting slide layout

The available layouts are shown in the Layouts panel on the Properties deck on the Sidebar. After selecting a slide, select the slide layout using one of the following methods:

Tip

To view the names for slide layouts, use the tooltip feature. Position the mouse pointer on an icon in the Layouts panel (or on any other tool icon) in the Properties deck on the Sidebar and its name is displayed in a small rectangle.

Changing slide layout

Change the slide layout for a slide in a presentation as follows:

1)  Select a slide in the presentation.

2)  Select a new layout for the slide using one of the methods described in “Selecting slide layoutabove.

Slide contents

Several layouts can contain one or more content boxes. Each of these content boxes can be configured to contain the following elements. For more information on layout content boxes, see the Impress Guide.

Note

Text and graphic elements can be readjusted at any time during the preparation of a presentation. However, changing slide layout that already has contents can have a dramatic effect. If the layout is changed after contents have been added, the contents are not lost, but they may need to be reformatted.

Modifying slide elements

When a slide is inserted into a presentation, it contains elements that were included in the selected slide layout. However, it is unlikely that the predefined layouts will suit all requirements for a presentation. Elements required maybe removed or objects inserted such as text and/or graphics.

Although Impress does not have the functionality to create new layouts, it allows for the resizing and moving of the slide elements. It is also possible to add slide elements without being limited to the size and position of content boxes.

Note

It is recommended that changes to slide elements in the layouts included in Impress are only made using Normal view, which is the default. Attempting any changes to a slide element when in Master view is possible, but may produce unpredictable results and requires extra care as well as a certain amount of trial and error.

Moving contents box

1)  Click on the outer frame of the contents box so that the selection handles are displayed.

2)  Place the mouse pointer on the frame so the pointer changes shape. This is normally a clenched hand, but depends on the computer setup.

3)  Click and drag the contents box to its new position on the slide, then release the mouse button.

Resizing contents box

1)  Click on the outer frame of the contents box so that the selection handles are displayed.

2)  Place the mouse pointer on the frame so that the pointer changes shape.

3)  Click and drag the selection handle on the frame to resize the contents box, then release the mouse button.

Removing elements

1)  Click a contents box or an element to highlight it and the selection handles are displayed.

2)  Press the Delete or Backspace key to remove the contents box or element.

Adding text

There are two ways of adding text to a slide – contents box or text box. For more information, see “Adding and formatting text” on page 1 and the Impress Guide.

Adding images or objects

To add images or objects to a slide, for example a picture, clip art, drawing, photograph, or spreadsheet, click on Insert on the Menu bar and select in the drop-down menu the image or object type required. See “Inserting images, tables, charts, or media” on page 1 and the Impress Guide.

Modifying slide appearance

To change the background and other characteristics of all slides in the presentation, the master slide has to be modified or a different master slide selected, as explained in “Working with master slides” on page 1.

Figure 14: Slide Properties dialog - Background page

Image12

A master slide has a specified set of characteristics that acts as a template and is used as the starting point for creating other slides. These characteristics include slide background, objects in the background, formatting of any text used, and any background graphics.

Impress has a range of master slides, which are found in the Master Slides deck on the Sidebar. Additional master slides can be created or and saved, or added from other sources. See the Impress Guide for more information.

For example, to change the background of an individual slide or a master slide:

1)  Right click on a slide or master slide and select Slide Properties in the context menu to open the Slide Properties dialog (Figure 14).

2)  Select the Background tab and then select the type of background to use from None, Color, Gradient, Bitmap, Pattern and Hatch.

3)  Make a selection from the various properties that are available for each type of background.

4)  Click OK to save the change and close the dialog.

For more information on inserting, formatting, and changing a background, see the Impress Guide or Draw Guide.

Modifying presentations

By default, a presentation displays all the slides in the same order as they appear in Slide Sorter view on the Workspace. It is recommended to review the entire presentation and answer some questions. Run the presentation at least once, then answer the following questions. Also there maybe more questions after running a presentation for the first time, for example:

Once the questions have been answered, make the necessary changes. Making changes can be carried out in Slide Sorter view on the Workspace. For more information on running a presentation, see the Impress Guide.

Adding and formatting text

Most of the slides in a presentation are likely to contain some text. This section gives some guidelines on how to add text and change its appearance. Text used in slides is contained in text boxes. For more information on adding and formatting text, see the Impress Guide.

Two types of text boxes (AutoLayout text box and text box) are available in Impress for use on slides. Both types of text boxes can be moved, resized, and deleted.

When adding and formatting text, the Text Formatting toolbar (Figure 16) normally opens, automatically providing a range of tools to add and format text.

Note

If the toolbars are not visible, go to View > Toolbars on the Menu bar and select the required toolbars in the drop-down list.

Note

The area fill and borders in AutoLayout text boxes and text boxes can be edited using the same methods that are used for graphic objects. For more information, see the Impress Guide.

Figure 15: Text toolbar

Image15

Figure 16: Text Formatting toolbar

Image16

AutoLayout text boxes

AutoLayout text boxes are automatically created when one of the slide layouts available in Impress is selected.

1)  Make sure Normal view is selected in the Workspace.

2)  Select the slide where text is to be added into an AutoLayout text box.

3)  Click on Click to add Title or Click to add text in an AutoLayout text box. The text automatically disappears and is replaced by a flashing text cursor. The Text Formatting toolbar automatically opens replacing the Line and Filling toolbar.

4)  Type or paste text into the AutoLayout text box and, if necessary, format the text to the presentation requirements.

5)  Click outside the AutoLayout text box to deselect it.

Text boxes

1)  Make sure Normal view is selected in the Workspace.

2)  Select the slide where the text is to be added.

3)  For horizontal text: click on the selected slide and create a text box using one of the following methods:

4)  The text box is now in edit mode and indicated by a colored border (Figure 17). The width and final position of the text box can be adjusted after adding text into the text box.

5)  Click outside the text box to deselect it.

Figure 17: Example of a text box in edit mode

Image17

Vertical text

In addition to normal text boxes where text is horizontally aligned, it is possible to insert text boxes where the text is vertically aligned. Vertical text is available only when Asian languages are enabled in Tools > Options > Language Settings > Languages.

Creating vertical text boxes is similar to creating horizontal text boxes. Use the Insert Vertical Text tool on the Standard, Drawing, or Text toolbars to create a vertical text box with single or multiple lines. The height of the text box is fixed and the width of a vertical text box increases automatically as text is added to a multi-line text box.

Quick font resizing

To quickly increase or decrease the font size of selected text by using the tools Increase Font Size (Ctrl+]) (macOS ⌘+]) and Decrease Font Size (Ctrl+[) (macOS ⌘+[) on the Text Formatting toolbar. The amount by which the font size changes depends on the standard sizes available for the font in use.

Note

AutoLayout text boxes automatically adjust font size of any text inserted into the box. For example, if a long piece of text is inserted into an AutoLayout text box, the font size may decrease in size to fit into the box.

Pasting text

Text can be added to an AutoLayout or normal text box by copying it from another document and pasting it into Impress. However, the formatting of the pasted text will probably not match the formatting of the surrounding text or that of the other slides in the presentation. This may be what is required on some occasions. However, to make sure that the presentation style is consistent and does not become a patchwork of different styles, font types, bullet points, and so on, the text has to be formatted to match the rest of the presentation.

Unformatted text

It is good practice to paste text without formatting and apply the formatting later.

1)  Highlight and copy the text from another document or slide.

2)  Create a text box on a slide and make sure the text cursor is flashing in the text box. Alternatively, select an AutoLayout text box on a slide. See “Text boxes” on page 1 and see “AutoLayout text boxes” on page 1 and the Impress Guide for more information.

3)  Paste unformatted text into the text box using one of the following methods. Text is pasted at the cursor position in the text box formatted using the Default Drawing Style or Presentation Style if text was pasted into an AutoLayout text box.

4)  Format the text to the presentation requirements using the tools on the Text Formatting toolbar or the options in Format on the Menu bar.

Note

The Presentation style used in AutoLayout text boxes cannot be changed by selecting another presentation style. Make sure the AutoLayout text box uses the presentation style required. Change outline levels and outline styles using the Tab key or Shift+Tab key combination. See the Impress Guide for more information.

AutoLayout text box formatting of pasted text

If text is being pasted into an AutoLayout text box, the appropriate outline style has to be applied to the text giving it the same look and feel as the rest of the presentation.

1)  Highlight and copy the text from another document or slide.

2)  Paste the text into the AutoLayout text box, then select the pasted text.

3)  Select Format > Clear Direct Formatting on the Menu bar, or use the keyboard shortcut Ctrl+Shift+M (macOS ⌘+Shift+M) to make sure any formatting is removed from the pasted text.

4)  Use the four arrow buttons on the Outline toolbar to move the text to the appropriate position and give it the appropriate outline level.

5)  If necessary, modify the presentation style to format the text to the presentation requirements to change font attributes, tabs, and so on. See the Impress Guide for more information. Alternatively, apply any necessary manual or direct formatting to the text.

Text box formatting of pasted text

Pasting formatted text into a text box overwrites any formatting and replaces the text box style.

1)  Highlight and copy the text from another document or slide.

2)  If necessary, create a text box on a slide and make sure the text cursor is flashing in the text box. See “Text boxes” on page 1 and the Impress Guide for more information.

3)  Paste formatted text into the text box. Text is pasted at the cursor position in the text box and the text formatting of the pasted text overwrites any style formatting of the text box.

4)  Select Format > Clear Direct Formatting on the Menu bar or use the keyboard shortcut Ctrl+Shift+M (macOS ⌘+Shift+M) to make sure any formatting is removed from the pasted text.

5)  Select the required drawing style to format the text from the available drawing styles.

6)  If necessary, modify a drawing style or create a new drawing style to format the text to the presentation requirements. See the Impress Guide for more information.

Note

Drawing styles can be created in Impress and are only available for the presentation which is being created and has been saved. Templates can also be created that include any drawing styles required. For more information, see the Impress Guide.

Creating lists

The procedure to create an unordered (bulleted) or ordered (numbered) list varies depending on the type of text box used. The tools to manage and format a list are the same. To change the appearance of a list, see Changing list type” on page 1.

Figure 18: Example of outline levels in AutoLayout text box

Image18

AutoLayout text boxes

In AutoLayout text boxes and by default, the outline styles available are unordered lists. An example of these outline styles is shown in Figure 18. These outline styles are presentation styles and cannot be deleted, but can be modified or updated to the presentation requirements. See the Impress Guide for more information.

Create a slide using an AutoLayout text box with an unordered list as follows:

1)  Go to View > Normal on the Menu bar to open Normal view.

2)  Select a layout for the slide using one of the following methods:

3)  Click on the text ● Click to add Text and start typing the first list item.

4)  Press Enter to start a new list point or use the keyboard combination Shift+Enter to start a new line without creating a new list point. The new line will have the same indentation as the list point.

Tip

To switch off bullets altogether, click on Toggle Unordered List on the Text Formatting toolbar.

Changing outline level

In AutoLayout text boxes, change the outline level as follows:

1)  To demote the outline level of a list point, use one of the following methods:

2)  To promote the outline level of a list point, use one of the following methods:

3)  To move a list point lower or higher in the list order without changing the outline level, use one of the following methods:

Note

In AutoLayout text boxes, promoting or demoting an item in the list corresponds to applying a different outline style. The second outline level corresponds to Outline 2 style, the third outline level to Outline 3 style, and so on. A change in level and style produces other changes, for example, to font size, bullet type, and so on.

Text boxes

Create an unordered or ordered list in a text box as follows:

1)  Create a text box on a slide and make sure the cursor is flashing in the text box. See “Text boxes” on page 1 on how to create a text box.

2)  Create a list using one of the following methods:

3)  Type the text and press Enter to start a new list point or use the keyboard combination Shift+Enter to start a new line without creating a new list point. The new line will have the same indentation as the list point.

4)  To increase or decrease the indent level of a list point, or move a list point up or down, see “Changing outline level” on page 1.

Changing list type

The list type can be changed for an unordered or ordered type for the entire list or for a single point only as follows:

1)  Select a point in a list, or select the entire list in the text box. Alternatively, click on the border of the text box so that the resizing handles are displayed to select the entire list.

2)  Change the list type from unordered to ordered list, or ordered to unordered as described in “Text boxesabove.

3)  If required, change the type of bullet or number used for the list:

a)  Click on the triangle ▼ to the right of the Toggle Unordered List or Toggle Ordered List on the Text Formatting toolbar or the Lists panel on the Properties deck in the Sidebar.

b)  Select a bullet or number type from the options available in the drop-down window as shown in Figure 19.

c)  If necessary, click on More Bullets or More Numbering in the drop-down window to open the Bullets and Numbering dialog for further options to change the list appearance. See the Impress Guide for more information.

Figure 19: Available types for bullet and number lists

Image19

Changing bullet or number format

The bullet or number format used in a list can be changed for the entire list or for a single point only as follows:

1)  Select a point in a list, or select the entire list in the text box. Alternatively, click on the border of the text box so that the resizing handles are displayed to select the entire list.

2)  Click on the triangle ▼ to the right of the Toggle Unordered List or Toggle Ordered List on the Text Formatting toolbar or the Lists panel on the Properties deck in the Sidebar to open a drop-down dialog displaying the format options available.

3)  Select a bullet or number type from the options available in the drop-down window as shown in Figure 19.

4)  If necessary, click on More Bullets or More Numbering in the drop-down window to open the Bullets and Numbering dialog for further options to change the list appearance. See the Impress Guide for more information.

Note

The Bullets and Numbering dialog can also be opened by going to Format > Bullets and Numbering on the Menu bar, or by right-clicking on a list point and selecting Bullets and Numbering in the context menu.

Note

If a list was created in an AutoLayout text box, then the Outline styles can be modified to change the list type and/or format. Changes made to an Outline style apply to all the slides that use that style. For details, see the Impress Guide.

Text columns

Text in a presentation can be formatted into columns inside text boxes and objects. However, columns cannot be used on separate parts of text inside a text box or object. The whole of the text box or object has to be used for columns.

Figure 20: Text dialog - Text Columns page

Image37

Figure 21: Columns panel in Properties deck on Sidebar

Image48

The type of columns used in Impress are continuous flow columns. This means that when text reaches the bottom of a column, it automatically flows into the next column as text is added. This type of columns is also known as newspaper columns.

Columns in text boxes and graphic objects are created as follows:

1)  For text boxes – click the border of a text box to select it so that the selection handles are displayed indicating that the text box is in edit mode.

2)  For graphic objects – double-click on a graphic object to select it so that the selection handles are displayed and the cursor flashes in the center of the object indicating that the object is in text edit mode.

3)  Open the options for text columns using one of the following methods:

4)  Set the number of columns required in the Number of columns box and the required spacing between the columns in the Spacing box.

5)  Save the changes and deselect the text box or graphic object using one of the following methods:

6)  Type in the required text or use copy and paste to enter the required text into the text box or graphic object. Any text entered will be in column format.

7)  If necessary, format the text to the presentation requirements.

8)  Click outside the text box or graphic object to deselect it and save the changes.

Note

Any text inside a text box or graphic object automatically flows into column format when the changes are saved.

Inserting images, tables, charts, or media

A contents box on a slide can contain images, tables, charts, or media as well as text. The Insert toolbar (Figure 22) provides quick access to relevant tools. This section provides an overview of how to work with these objects. For more information, see the Impress Guide.

Inserting images

1)  Open the slide in Normal view on the Workspace where the image is going to be inserted.

2)  Open the Insert Image file browser using one of the following methods:

3)  Navigate to the location of the file and select the image file required.

4)  Click Open to place the image in the center of the slide.

5)  Reposition and resize the image to the presentation requirements.

Figure 22: Insert toolbar

Image20

Inserting tables

When a table is inserted into a slide, the Table toolbar (Figure 23) automatically opens. This toolbar in Impress offers the same functions as the Table toolbar in Writer, with the exception of the calculation functions Sort and Sum. To use Sum and Sort in a presentation, a Calc spreadsheet has to be inserted into the slide.

Note

If the Table toolbar does not automatically open, go to View > Toolbars on the Menu bar and select the Table toolbar.

Figure 23: Table toolbar

Image25

Entering data into table cells is similar to working with text box objects. Click in a cell and begin typing. To move around cells quickly, use the following keyboard options:

Using the Menu bar

1)  Open the slide in Normal view on the Workspace and go to Insert > Table on the Menu bar to open the Insert Table dialog (Figure 24).

2)  Select the Number of columns and the Number of rows required for the table.

3)  Click OK to place the table in the center of the slide and close the Insert Table dialog.

4)  The Table Design panel on the Properties deck on the Sidebar opens (Figure 25). Select a table design, the type of rows, and the type of columns required.

5)  If necessary, reposition and format the table on the slide to the presentation requirements.

Figure 24: Insert Table dialog

Image22

Figure 25: Table Design panel in Properties deck on Sidebar

Image11

Figure 26: Insert Table grid

Image24

Using Insert or Standard toolbar

1)  Open the slide in Normal view on the Workspace and click on Table on the Insert toolbar or the Standard toolbar to open the Insert Table grid (Figure 26).

2)  Click and drag the mouse pointer to create the number of columns and rows required.

3)  Click the mouse button to place the table in the center of the slide and the Insert Table grid closes.

4)  The Table Design panel on the Properties deck in the Sidebar opens (Figure 25). Select a table design, the type of rows, and the type of columns from the options available.

5)  If necessary, reposition and format the table on the slide to the presentation requirements.

Note

Select More Options at the bottom of the Insert Table grid (Figure 26) to open the Insert Table dialog (Figure 24) where the number of rows and columns required can be selected.

Inserting charts

To insert a chart into a selected slide in Normal view on the Workspace, use one of the following methods:

Impress switches to chart view, the Formatting toolbar (Figure 27) automatically opens, and the Chart Type panel on the Properties deck on the Sidebar opens (Figure 28). To change the chart type, insert the required data, and change the formatting, see the Impress Guide and the Calc Guide.

Figure 27: Formatting toolbar

Image26

Figure 28: Chart Type panel in the Properties deck on the Sidebar

Image27

Figure 29: Gallery deck on Sidebar

Image14

Inserting audio or video

Using file browser

1)  Go to Insert > Audio or Video on the Menu bar, or click on Insert Audio or Video on the Insert toolbar and the Insert Audio or Video file browser opens.

2)  Navigate to the folder where the file is located and select the audio or video file you want to insert onto a slide. Only the audio and video files that are compatible with Impress will be highlighted in the file browser.

3)  Click Open to place the audio or video file in the center of the slide. The Media Playback toolbar opens while the audio or video file is selected.

4)  Reposition and/or resize the audio or video file. See the Impress Guide for more information.

Using the Gallery

1)  If the Gallery deck (Figure 29) is not already open, use one of the following methods:

2)  Browse to a category containing media files, for example Sounds.

3)  Click on the audio or video file required and drag it onto the slide. The Media Playback toolbar automatically opens.

4)  Reposition and/or resize the audio or video file. See the Impress Guide for more information.

Inserting graphics, spreadsheets, and OLE objects

Graphics

Graphics, such as shapes, callouts, and arrows, are often useful to complement the text on a slide. These objects are handled much the same way as graphics in Draw. For more information on inserting graphics, see Chapter 7, Getting Started with Draw in this guide, the Impress Guide, or the Draw Guide.

Spreadsheets

Spreadsheets embedded in Impress include most of the functionality of Calc spreadsheets and are capable of performing complex calculations and data analysis. If the data has to be analyzed or formulas applied, then these operations are best performed in a Calc spreadsheet and the results displayed in an embedded Calc spreadsheet or in an Impress table. For more information on spreadsheets, see the Impress Guide and the Calc Guide.

OLE objects

Object Linking and Embedding (OLE) is a software technology that allows linking and embedding of spreadsheets, charts, drawings, formulas, and text files into an Impress presentation.

The major benefit of using OLE objects is that it provides a quick and easy method of editing the object using tools from the software used to create the object. These file types can all be created using LibreOffice and OLE objects can be created from new or from an existing file.

When inserting a new OLE object into a presentation, it is only available in that presentation and can only be edited using Impress. For more information on inserting and formatting OLE objects, see the Impress Guide.

Working with master slides

A master slide is a slide that is used as the starting point for other slides. It is similar to a page style in LibreOffice Writer as it controls the basic formatting of all slides based on it. A presentation can have more than one master slide.

A master slide has a defined set of characteristics, including the background color, graphic, or gradient. It also can include objects (for example, logos, decorative lines) in the background; headers and footers; placement and size of text frames; and text formatting.

Styles

All of the characteristics of master slides are controlled by styles. The styles of any new slide created are inherited from the master slide from which it was created. In other words, the styles of the master slide are available and applied to all slides created from that master slide. Changing a style in a master slide results in changes to all the slides based on that master slide. It is possible to modify each individual slide without affecting the master slide.

Master slides have two types of styles: presentation styles and drawing styles. The presentation styles included with Impress can be modified, but new presentation styles cannot be created or deleted. The drawing styles included with Impress can be modified, but cannot be deleted. However, new drawing styles can be created and these drawing styles can be deleted.

Note

It is highly recommended to use the master slides whenever possible. However, there are occasions where manual changes are needed for a particular slide, for example editing an individual slide to enlarge the chart area when the text and chart layout is used.

Master slides

Impress comes with a collection of master slides, which are are shown on the Master Slides deck of the Sidebar (Figure 30).

Figure 30: Master Slides deck on Sidebar

Image13

Figure 31: Default master slide

Image2

This deck has three panels: Used in This Presentation, Recently Used, and Available for Use. Click the expand marker on the title bar of a panel to expand it and show thumbnails of the master slides, or click the collapse marker to collapse the panel to hide the thumbnails.

Each of the master slides shown in the Available for Use panel is from a template of the same name. These presentation templates are included when LibreOffice is installed on a computer. If templates have been created or added from other sources, master slides from those templates also appear in this list.

If a new presentation is created without using one of the templates available, then a default master slide is available. This default master slide is a good starting point for creating master slides. An example of the default master slide is shown in Figure 31.

Creating master slides

1)  Go to View > Master Slide on the Menu bar to open Master view in the Workspace. The Master View toolbar also opens (Figure 32). If the Master View toolbar does not open, go to View > Toolbars on the Menu bar and select Master View.

2)  Create a new master slide using one of the following methods. The new master slide appears in the Slides pane:

3)  Rename the new master slide using one of the following methods to open the Rename Master Slide dialog:

Figure 32: Master View toolbar

Image31

4)  Enter a memorable name for the new master slide, then click OK to save the changes and close the dialog.

5)  Make sure the new master slide is selected in the Slides pane and add all the text, graphics and master elements that are required. For more information on adding, editing, formatting and managing the different types of objects on a master slide, see the Impress Guide.

6)  When the new master slide has been created, use one of the following methods to return to Normal view:

7)  Save the presentation file before continuing.

Applying master slides

To apply a master slide to all slides or selected slides in a presentation:

1)  Click on Master Slides on the right of the Sidebar to open the Master Slides deck.

2)  Right-click on the required master slide in the Used in This Presentation panel.

3)  Select Apply to All Slides or Apply to Selected Slides in the context menu.

Loading additional master slides

In a presentation, it may be necessary to mix multiple master slides that belong to different templates (for more information on templates, see the Impress Guide). For example, a completely different layout for the first slide of the presentation maybe required, or a slide from a different presentation maybe added to the current presentation.

1)  Select the slide or slides on the Slides pane where the master slide is to be changed.

2)  Go to Slide > Change Slide Master on the Menu bar to open the Available Master Slides dialog (Figure 33).

Figure 33: Available Master Slides dialog

Image33

Figure 34: Load Master Slide dialog

Image51

3)  To add master slides, click on Load to open the Load Master Slide dialog (Figure 34).

4)  In the Load Master Slide dialog, select the template category and the template from which to load the master slide

5)  Click OK to close the Load Master Slide dialog and the master slides from the selected template appear in the Available Master Slides dialog.

6)  In the Available Master Slides dialog, select the master slide required in the Select a Slide Design box.

7)  To apply the selected master slide to all slides in the presentation, select the Exchange background page check box. To apply the slide design to the selected slides only, deselect the Exchange background page check box.

8)  Click OK to apply the selection to the slides and close the dialog.

Note

The master slides in the template selected are now shown in the Available for use panel on the Master Slides deck on the Sidebar.

Modifying master slides

The following items can be changed on a master slide. For more information, see the Impress Guide:

To modify a master slide, follow these steps:

1)  Select View > Master Slide on the Menu bar. This also opens the Master View toolbar.

2)  Select a master slide for editing in the Slides pane so that it appears in the Workspace.

Figure 35: Slide Properties dialog - Slide page

Image21

3)  Go to Slide > Slide Properties on the Menu bar or right-click in the Workspace and select Slide Properties in the context menu to open the Slide Properties dialog (Figure 35).

4)  Use the various options in the Slide, Background, and Transparency pages in the Slide Properties dialog to make changes to the format of the master slide.

5)  Click OK to save the changes and close the Slide Properties dialog.

6)  Select an object on the master slide, then right-click on the object to open a context menu.

7)  Select one of the options in the context menu to edit the object. Selecting an option may open another context menu, a dialog, an application or file browser window to make the necessary changes to the selected object.

8)  Click Close Master View on the Master View toolbar or go to View > Normal on the Menu bar to exit from editing master slides.

9)  Save the presentation file before continuing.

Note

Any changes made to one slide when in Master Slide mode appears on all slides using this master slide. Always make sure to close Master Slide and return to Normal view before working on any of the presentation slides.

Note

The changes made to an element on a slide in Normal view is not overridden by subsequent changes to the master slide. There are cases, however, where it is desirable to change a manually modified element of a slide to the style defined in the master slide. To change to default formatting, select the element and select Format > Clear Direct Formatting on the Menu bar.

Adding text, footers, and fields to master slides

Text, footers, or fields can be added to a master slide so those elements appear on every slide in a presentation. Headers are not normally added to slides.

Text

1)  Go to View > Master Slide on the Menu bar to open Master View.

2)  Insert a text box on the master slide, see “Text boxes” on page 1 for more information.

3)  Type or paste the text into the text box.

4)  Click outside the text box when finished adding text.

5)  Go to View > Normal on the Menu bar or click Close Master View on the Master View toolbar when finished.

Default footers

By default, a slide footer consists of three sections, each containing a default field:

The default footer fields are set up as follows using the Header and Footer dialog (Figure 36):

1)  Go to View > Master Slide on the Menu bar to open Master View.

2)  Go to Insert > Header and Footer on the Menu bar to open the Header and Footer dialog.

Figure 36: Header and Footer dialog - Slides page

Image35

3)  Click on the Slides tab to open the options available for inserting footers onto a slide.

4)  Select Date and Time for the date and time to appear in the left section of the footer.

5)  To place text in the footer center section, select Footer and then type or paste the text into the Footer text input field.

6)  To place the slide number in the right section of the footer, select Slide number.

7)  If the footer is not going to appear on the first slide of a presentation, select Do not show on the first slide. The first slide is normally the title slide of a presentation.

8)  Click Apply to save the changes and close the Header and Footer dialog.

9)  To format the text used for the default footer fields, see the Impress Guide.

10)  Click Close Master View on the Master View toolbar or go to View > Normal on the Menu bar when setting up the default footer fields is completed.

Note

The default sections in a footer can be formatted, resized, and repositioned. See “Adding and formatting text” on page 1 for more information.

Custom footers

The default fields in a footer section can be replaced with text or manual fields as follows:

1)  Go to View > Master Slide on the Menu bar to open the master slide view.

2)  Highlight the default field in the footer section and press the Delete or Backspace key. A flashing text cursor will appear in the footer section and the Text Formatting toolbar automatically opens replacing the Line and Filling toolbar.

3)  Type in the required text or insert a manual field into the footer section. For more information, see “Manual fields” on page 1.

4)  Format the text or manual field placed in the footer section. See “Adding and formatting text” on page 1 and the Impress Guide for more information.

5)  Click outside the footer section to close the Text Formatting toolbar and reopen the Line and Filling toolbar.

6)  Click Close Master View on the Master View toolbar or go to View > Normal on the Menu bar when setting up a custom footer section is completed.

Manual fields

Manual fields can be added as text objects on a master slide or replace one of the default footer fields and are as follows:

Tip

To change the author information, go to Tools > Options > LibreOffice > User Data on the Menu bar.

Adding comments

Impress supports comments similar to those in Writer and Calc. For more about adding, navigating, and replying to comments, see Chapter 2, Getting Started with Writer.

Before using comments, make sure that the user name and initials are entered into Tools > Options > LibreOffice > User Data. The name and initials then appear in the comment marker and in the Author field of the comment. If more than one person edits the document, each person is automatically allocated a different background color.

1)  In Normal View, go to Insert > Comment on the Menu bar or use the keyboard shortcut Ctrl+Alt+C to open a blank comment (Figure 37).

A small box containing the user initials appears in the upper left-hand corner of the slide, with a larger text box beside it. Impress automatically adds the user name and current date at the bottom of the text box.

2)  Type or paste the comment into the text box.

3)  Move the small comment markers to the required position on the slide. Normally, this is on or near the text or object being referred to in the comment.

4)  To show or hide the comment markers, choose View > Comments on the Menu bar.

5)  Select Tools > Options > LibreOffice > User Data to configure the name and initials that appear in comments.

Figure 37: Adding a comment

Image36

Figure 38: Example of Master Handout layout

Image23

Figure 39: Header and Footer dialog - Notes and Handouts page

Image49

Figure 40: Example of Print dialog – LibreOffice Impress page

Image38

Printing handouts

Handouts are used for distributing copies of presentation slides to each member of the audience. Handouts are only available in View > Handout on the Menu bar and are printed using the printing options in Impress.

The printing of handouts depends on the printer, computer operating system, and how a computer is set up. The following is only an example of how to print handouts.

1)  Go to View > Master Handout on the Menu bar to open the Master Handout layout in the Workspace. An example Master Handout is shown in Figure 38.

2)  Go to Insert > Header and Footer on the Menu bar to open the Header and Footer dialog (Figure 39).

3)  Click on Notes and Handouts tab, the select the required header and footer options as follows:

4)  Click on Apply to All to save the options for the handouts and close the Header and Footer dialog.

5)  Go to File > Print on the Menu bar or use the keyboard shortcut Ctrl+P (macOS ⌘+P) to open the Print dialog and click on the LibreOffice Impress tab to open the page for printing options of handouts. An example Print dialog is shown in Figure 40.

6)  In Document, select the required options in the drop-down lists as follows:

7)  In Contents, select Slide name, Date and time, and/or Hidden pages if these items are to be printed.

8)  In Color, select how the handouts are printed.

9)  In Size, select the size for how the handouts are printed.

10)  Click on Print to print the handouts and close the Print dialog.

Creating a photo album

Impress can create a photo album from a set of photographs and images. The photo album can be a multimedia show with vacation pictures and/or graphics and images as a presentation file.

1)  Create a new presentation or open an existing presentation.

2)  Select the slide that is going to precede the photo album. In a new presentation, this will be the first slide.

3)  Go to Insert > Media > Photo Album on the Menu bar to open the Create Photo Album dialog (Figure 41).

4)  Click on Add to open a file browser and navigate to the folder where the images are located.

5)  Select the images required and click Open. This closes the file browser and the selected files appear in the Create Photo Album dialog.

Figure 41: Create Photo Album dialog

Image40

6)  Select the number of images per slide in the Slide layout: drop-down list.

7)  If required, select Add caption to each slide. This inserts a text box on each slide allowing captions to be added to the images.

8)  If required and there is only one image per slide, select Fill Screen for each image to fill the entire slide.

9)  Create the required sequence of photos or pictures by moving image files up or down in the list of images.

10)  When the sequence of images is ready, click Insert Slides to create the number of slides required for the photo album. The sequence can be changed later.

11)  If required, copy and paste images between slides as with any other elements that can be placed on a slide.

12)  If required, set up the photo album to run as a presentation. See “Presentations (slide shows)below, “Running presentations” on page 1, and the Impress Guide.

Presentations (slide shows)

Impress allocates reasonable default settings for presentations, while at the same time allowing for customizing many aspects of the presentation experience. This section provides an introduction to presentations. For more information on creating, formatting and running presentations, see the Impress Guide.

Most of the tasks are best done in Slide Sorter view in the Workspace where the majority of the slides in a presentation can be viewed. Go to View > Slide Sorter on the Menu bar or click on the Slide Sorter tab at the top of the Workspace.

Multiple presentations – single set of slides

There may be more slides than the time available for a presentation, or only a brief overview is required first and then a more detailed presentation at a later date. Impress provides two tools for this: hiding slides and custom slide shows.

Hiding slides

1)  Select slides for hiding in the Slides pane or Slide Sorter view in the Workspace.

2)  Hide the selected slides using one of the following methods. Hidden slides are grayed out in the Slides pane or Slide Sorter view in the Workspace.

3)  To show a hidden slide, use one of the following methods.

Custom slide shows

1)  Select the slides required for a custom slide show in the Slides pane or Slide Sorter view in the Workspace.

2)  Go to Slide Show > Custom Slide Show on the Menu bar to open the Custom Slide Shows dialog (Figure 42).

3)  Click on New and the Define Custom Slide Show dialog opens (Figure 43).

Figure 42: Custom Slide Shows dialog

Image42

Figure 43: Define Custom Slide Show dialog

Image28

4)  Type a name for the new custom slide show in the Name text box.

5)  In the Existing slides list, select the slides to include in the show.

6)  Click the >> button to include the slides in the Selected slides list. Several slides can be selected and included at the same time. Hold down the Shift key and click the first and last slide in a group to select that group, or hold down the Ctrl key (macOS )and click on individual slides to select them.

7)  If required, rearrange the slide order in the Selected slides list. Click on a slide name and drag it to a new position in the list, then release the mouse button.

8)  Click OK to save the custom slide show and return to the Custom Slide Shows dialog.

9)  To activate a custom show, select it in the list in the Custom Slide Shows dialog and then select the Use custom slide show option.

10)  Click Start to test the custom slide show or click OK to close the Custom Slide Shows dialog.

Slide transition

Slide transitions are effects and/or sounds that take place between slides when slides change in a presentation and can add a professional look to a presentation, smoothing the change over between slides. For more information on how to setup slide transitions, modify slide transitions, and to advance slides in a presentation, see the Impress Guide.

1)  Click on Slide Transition in the Sidebar to open the Slide Transition deck (Figure 44).

2)  In the Slides pane or Slide Sorter view in the Workspace, select the slides where slide transitions are going to be applied.

3)  Click on a transition to apply it to the selected slide.

4)  To apply the same transition to all slides in the presentation, click Apply Transition to All Slides at the bottom of the Slides Transition deck.

Figure 44: Slide Transition deck on the Sidebar

Image43

5)  To check how the transition looks, click Play at the bottom of the Slides Transition deck. Alternatively, to automatically preview how the transition looks when it is applied, select Automatic Preview at the bottom of the Slides Transition deck.

6)  In the Advance Slide section, select how the slides change in a presentation.

Playing sounds or music

Sound or music can be played during a presentation as a transition effect. When using music in a presentation, make sure any copyright or license for the music is not being infringed.

1)  Click on Slide Transition on the Sidebar to open the Slide Transition deck.

2)  In the Slides pane or Slide Sorter view in the Workspace, select the slide to add sound or music.

3)  In the Modify Transition section, select a sound in the Sound drop-down list.

4)  To play music, use the following steps to select a music file:

a)  Select Other sound in the Sound drop-down list.

b)  In the file browser window that opens, navigate to where the music file is located.

c)  Select the music file required and click Play to check if the music is suitable.

d)  If the music is suitable, click Open to add the music to the selected slide and close the file browser window.

5)  To play a sound or music file continuously in the slide show, select the option Loop until next sound. The sound or music file restarts once it is finished until the next sound or music file that is inserted in the slide show.

Note

Do not select the Apply Transition to All Slides option, otherwise the selected music file restarts at every slide.

Note

The sound or music file is linked to a presentation rather than embedded. If the presentation is going to be displayed on a different computer, remember to make sure that the music file is available on the computer where the presentation will be played. The link to the sound or music file must be established before starting the presentation.

Animation effects

Slide animations are similar to transitions, but they are applied to individual elements in a single slide, such as title, chart, shape, or individual bullet point. Animations can make a presentation more lively and memorable. However, as with transitions, heavy use of animations can be distracting and even annoying for an audience expecting a professional presentation.

Animations are best applied using Normal view in the Workspace so that you can easily select individual objects on a single slide.

Figure 45: Animation deck in Sidebar

Image39

On a slide, an element such as a graphic or an entire text box has selection handles around it when selected. If you select only a portion of the text in a text box, any selection handles may not be visible. For more information on animation effects, see the Impress Guide.

1)  Go to View > Normal on the Menu bar to open Normal view in the Workspace.

2)  Select an element on a slide for animation.

3)  On the Sidebar, select Animation to open the Animation deck (Figure 45).

4)  Select a slide in the Animation panel and then click on Add Effect (+ plus sign) in the Effects panel to open the animation options.

a)  Select an animation category in the Category drop-down list.

b)  Select an animation effect from the available options in the Effect list.

c)  Select how the animation starts in the Start drop-down list.

d)  Select the direction of the animation in the Direction drop-down list.

e)  Enter a time for the duration of the animation in the Duration box.

f)  Enter a time for the delay of when the animation starts in the Delay box.

5)  If required, select Automatic Preview so that how the animation looks can be checked when applied to a slide element.

6)  Click Play to check how the animation looks when applied to a slide element.

Running presentations

1)  Open the presentation and start the slide show using one of the following methods:

2)  If the slide transition is set to Automatically after x sec, the slide show starts and runs after the set time has elapsed.

3)  If the slide transition is set to On mouse click, click the left mouse button, or press the down arrow key, the right arrow key, the page down key, or the space bar.

4)  To navigate backwards through a slide show one slide at a time, press the up arrow key, the left arrow key, or the page up key.

5)  To access more navigation options during a slide-show, right-click on a slide and use the options available in the context menu.

6)  When the last slide has displayed, the message Click to exit presentation... is displayed on screen. Press the Esc key or click the left mouse button to exit the slide show.

7)  To exit the slide show and return to the Impress workspace at any time, press the Esc key during the slide show.

Note

During the presentation, any animations on a slide are run in the specified order as the slide is displayed.

Presenter Console

The Presenter Console provides extra control over slide shows when using dual displays, such as a laptop and a large display or projector for an audience. The view seen on a laptop display includes the current slide that can be seen by the audience, the next slide in the presentation, any slide notes, and a presentation timer.

Note

The Presenter Console only works with operating systems that support two displays. When two displays are being used, one display can be a laptop.

The Presenter Console has to be enabled in Impress before use. Go to Tools > Options > LibreOffice Impress > General (Figure 46) and select Enable Presenter Console in Presentation.

The Presenter Console provides the following views for making a presentation:

Figure 46: Options LibreOffice Impress General dialog

Image29

Figure 47: Presenter Console - Default view

Image45

Figure 48: Presenter Console - Notes view

Image46

Figure 49: Presenter Console - Slides view

Image47

Contents