Getting Started Guide 7.5
This document is Copyright © 2023 by the LibreOffice Documentation Team. Contributors are listed below. This document maybe distributed and/or modified under the terms of either the GNU General Public License (https://www.gnu.org/licenses/gpl.html), version 3 or later, or the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), version 4.0 or later. All trademarks within this guide belong to their legitimate owners.
Contributors for this edition:
Peter Schofield
Nay Catina Dia‑Schneebeli
Contributors for previous editions:
Amanda M Labby
Claire Wood
Dave Barton
Drew Jensen
Hazel Russman
Jean Hollis Weber
Jorge Rodríguez
Kees Kriek
Kevin O’Brien
Olivier Hallot
Peter Schofield
Ron Faile Jr.
Skip Masonsmith
Please direct any comments, or suggestions, about this document to the Documentation Team forum at https://community.documentfoundation.org/c/documentation/loguides/ (registration is required), or send an email to: loguides@community.documentfoundation.org.
Note
Everything sent to a mailing list, including email addresses and any other personal information that is written in the message, is publicly archived and cannot be deleted.
Published July 2023. Based on LibreOffice 7.5 Community.
Other versions of LibreOffice may differ in appearance and functionality.
Some keystrokes and menu items are different on macOS from those used in Windows and Linux. The table below gives some common substitutions used in this document. For a detailed list, see LibreOffice Help.
|
Windows or Linux |
macOS equivalent |
Effect |
|
Tools > Options |
LibreOffice > Preferences |
Access setup options |
|
Right-click |
Control+click, Ctrl+click, or right-click depending on computer setup |
Open a context menu |
|
Ctrl or Control |
⌘ and/or Cmd or Command, depending on keyboard |
|
|
Alt |
⌥ and/or Alt or Option depending on keyboard |
Used with other keys |
|
F11 |
⌘+T |
Open the Styles deck in the Sidebar |
Impress is the presentation (slide show) program included in LibreOffice. Impress creates presentations in the Open Document Presentation (ODP) format, which can be opened by other presentation software or can be exported in different presentation formats.
Slides can be created that contain many different elements, including text, bulleted and numbered lists, tables, charts, and a wide range of graphic objects such as clip art, drawings, and photographs. Impress also includes a spelling checker, a thesaurus, text styles, and background styles.
This chapter introduces some features of Impress and does not attempt to cover all of the features available in Impress that can be used to create presentations. See the Impress Guide and LibreOffice Help for more information.
To use Impress for more than very simple presentations requires some knowledge of the elements used on the slides. Slides containing text use styles to determine the appearance of that text. Creating drawings in Impress is similar to the Draw module included in LibreOffice. For more information, refer to Chapter 4, Working with Styles, Templates, and Hyperlinks, and Chapter 7, Getting Started with Draw, in this guide. It is recommended to consult the Draw Guide for more details on how to use the drawing tools.
Start Impress using any of the methods described in Chapter 1, LibreOffice Basics. The main Impress window opens and, by default, the Select a Template dialog (Figure 1) is displayed.
Figure 1: Select a Template dialog
Templates included with Impress are designed to fit the two standard sizes of presentation slides: 4:3 and 16:9 ratios. However, templates will adapt to other available sizes, which can be selected by going to Slide > Slide Properties > Paper Format on the Menu bar or Format in the Slide panel in the Properties deck on the Sidebar.
Tip
To start Impress without the Select a Template dialog, deselect Show this dialog box at startup in the lower left of the dialog.
In Windows or Linux, go to Tools > Options > LibreOffice Impress > General on the Menu bar (macOS LibreOffice > Preferences > LibreOffice Impress > General) and deselect Start with Template Selection under New Document.
The main Impress window (Figure 2) has three main sections: Slides pane, Workspace, and Sidebar. At the top is the Menu bar and toolbars. Toolbars can be displayed, hidden, locked in position, or floating during the creation of a presentation.
Tip
The Slides pane and/or Sidebar can be closed by clicking the X in the upper right corner of each pane, or go to View > Slide Pane or View > Sidebar on the Menu bar to deselect. To reopen a pane, select View > Slide Pane or View > Sidebar on the Menu bar.
The Impress Menu bar, at the top of the main window, provides several menus common to all LibreOffice modules. The commands may differ between each LibreOffice module for File, Edit, View, Insert, Format, Tools, Window, and Help. Impress has two extra menus for Slide and Slide Show. When a menu item is selected, a submenu opens to show commands. The Menu bar can be customized; see Chapter 13, Customizing LibreOffice.
The Workspace (normally the center of the main window) opens in Normal view. It has four standard views of Normal, Outline, Notes, and Slide Sorter. For more information, see “Workspace views” on page 1.
If master slides are being used, then master views become available: Master Slide, Master Notes and Master Handout. There are no tabs for master views, which are selected by going to View on the Menu bar. For more information on master slides, see the Impress Guide.
The Slides pane contains thumbnail images of slides in a presentation in the order in which the slides are shown. Clicking on a slide image in the Slides pane selects it and places the slide in the Workspace where changes are made to the displayed slide.
To display or close the Slides pane, go to View > Slide Pane on the Menu bar.
To close the Slides pane, click on the X in the right top corner of the Slides pane.
To display or hide the Slides pane, use the Hide/Show marker on the left of the Workspace.
Several additional operations can be carried out on one or more slides in the Slides pane. Also, these additional operations are available from a context menu when right-clicking on a slide in the Slides pane.
Add new slides to a presentation.
Hide a slide so that it will not show in a presentation.
Delete a slide from a presentation.
Rename a slide.
Duplicate a slide (copy and paste).
Move a slide to another position in the slide order by dragging and dropping it to the desired position.
Also, the following operations can be carried out, although there are more efficient methods than using the Slides pane:
Change the slide transition following the selected slide, or after each slide in a group.
Change the sequence of slides in the presentation.
Change the slide design.
Change slide layout for a group of slides simultaneously.
The Impress Sidebar, normally located on the right side of the Workspace, is similar to the Sidebar in the other LibreOffice modules. It consists of seven decks, as described below. To open a deck, use one of the following methods:
Click on its icon on the right side of the Sidebar.
Click on Sidebar Settings at the top of the Sidebar and select a deck in the drop‑down list.
Go to View on the Menu bar and select the deck required in the submenu.
The Properties deck has ten panels, allowing the slide layout to be changed and the formatting of any objects on a slide.
When a slide is selected and appears in the Workspace, the Properties deck opens with the Slide and Layouts panels available.
When an object on a slide is selected, the Properties deck has the following panels available: Character, Lists, Paragraph, Area, Shadow, Line, Position and Size, Columns, Effect, and Image. Actual panels displayed depends on the type of object selected.
On the Styles deck, drawing and presentation styles can be applied to a selected object, new styles created for drawing and presentation, and both types of styles can be modified. When saving changes to a style, the changes are applied to all of the elements formatted with that style in the presentation. For more information on styles, see “Styles” on page 1 and the Impress Guide.
On the Gallery deck, an object can be inserted into a presentation either as a copy. or as a link. A copy of an object is independent of the original object. Changes to the original object have no effect on the copy. A link remains dependent on the original object. Changes to the original object are also reflected in the link. See the Impress Guide for more information.
The Navigator deck displays all objects contained in a presentation. It provides a convenient way to move between slides in a presentation or select an object on a slide. It is recommended to give slides and objects in a presentation meaningful names so that they are easily identified when using the Navigator. For more information, see “Navigator” on page 1 and the Impress Guide.
The Shapes deck provides panels quick selection of the most commonly used items when creating a presentation and are also available on the Drawing toolbar:
Lines and Arrows Curves and Polygons
Connectors Basic Shapes
Symbol Shapes Block Arrows
Flowchart Callout
Stars and Banners 3D Objects.
The Slide Transition deck provides a selection of slide transitions available in Impress, providing controls for transition speed, automatic or manual transition, and how long a selected slide is shown (automatic transition only). For more information on transitions, see “Slide transition” on page 1 and the Impress Guide.
The Animation deck provides an easy way to add, change, or remove animations to different elements or objects on a slide and how they appear during a slide show. For more information on animation effects, see “Animation effects” on page 1 and the Impress Guide.
Using the Master Slides deck, the slide design can be selected for a presentation. Impress includes several designs for master slides. The default master slide is blank, but the remaining master slides have backgrounds and styled text. For more information on master slides, see “Working with master slides” on page 1 and the Impress Guide.
Rulers are positioned on the upper and left-hand sides of the Workspace. If the rulers are not visible, go to View > Rulers on the Menu bar. The rulers show the size of a selected object on the slide using double lines (highlighted in Figure 3). Rulers are also used to manage object handles and guide lines when positioning objects.
To change the measurement units of the rulers, right-click on a ruler and select the measurement unit from the drop-down list, as shown in Figure 4 for the horizontal ruler. The horizontal and vertical rulers can be set to different measurement units.
The page margins in the drawing area are also represented on the rulers. The margins can be changed directly on the rulers by dragging them with the mouse. The margin area is indicated by either a grayed out area on the rulers or borders around the unused area of the ruler. This margin indication depends on computer setup and operating system.
Figure 3: Object size highlighted on rulers
Figure 4: Changing ruler measurement units
Figure 5: Status bar
Slide number
Information area
Master slide
Cursor position
Object size
Unsaved changes
Digital signature
Text language
Fit slide
Zoom slide
Zoom percentage
The Status bar (Figure 5), located at the bottom of the Impress window, contains information that maybe useful when working on a presentation. Several of the fields are the same as those in other modules of LibreOffice. Some Impress specific fields are described briefly below.
For details on the contents and use of these fields, see Chapter 1, LibreOffice Basics, in this guide and the Impress Guide. To hide the Status bar, go to View on the Menu bar and deselect Status Bar.
Slide number
Information area
Table 1: Examples of information
|
Example selection |
Examples of information shown |
|
Text area |
Text Edit: Paragraph x, Row y, Column z |
|
Charts, spreadsheets |
Embedded object (OLE) “ObjectName” selected |
Master slide
Cursor position/Object size
When no object is selected, the position numbers show the current position (X and Y coordinates) of the cursor.
When an object is selected and being resized, the object size numbers show the size of the object (width and height).
If an object is selected, the position numbers shows X and Y coordinates of the upper‑left corner and the object size number pair displays the size of the object. These numbers do not relate to the object itself, but to the selection outline, which is the smallest possible rectangle that can contain the visible parts of the object.
When an object is selected, clicking in either of these areas opens the Position and Size dialog.
Unsaved changes
Digital signatures
Text language
Fit slide
Zoom slider
Zoom percentage
The Navigator displays all objects contained in a presentation providing a convenient way to move around a presentation find items in the presentation, and reorder objects on slides.
To open the Navigator dialog (Figure 6) go to View > Navigator on the Menu bar, or use the keyboard shortcut Ctrl+Shift+F5 (macOS ⌘+Shift+F5). Alternatively, click on Navigator in the Sidebar to open the Navigator deck that is similar in appearance and function as the Navigator dialog.
The Navigator is more useful if slides and objects (pictures, spreadsheets, and so on) are given meaningful names, instead of leaving them with default names, such as “Slide 1” and “Shape 1” and so on (as shown in Figure 6). Using meaningful names allows for a slide or object to be easily located in a presentation.
Figure 6: Navigator dialog
Toolbars are used when creating a presentation. To display or hide the various toolbars in Impress, go to View > Toolbars on the Menu bar and select the required toolbar in the submenu that opens. For example, the Standard and Drawing toolbars are displayed by default, but the Line and Filling, and Text Formatting toolbars are not shown. For more information on toolbars and how to use them, see Chapter 1, LibreOffice Basics, and the Impress Guide.
Note
The icons used on toolbars vary depending on the computer operating system and the selection of icon size and style in Tools > Options > LibreOffice > View (macOS LibreOffice > Preferences > LibreOffice > View).
The Impress workspace has four standard views selected using tabs: Normal, Outline, Notes, and Slide Sorter. These tabs are normally displayed the top of the Workspace. If the tabs are not displayed, then go to View > Views Tab Bar on the Menu bar. Also, different workspace views can be selected by going to View on the Menu bar and selecting a view in the submenu. Each of the workspace views is designed to ease the completion of certain tasks.
Master views only become available in the Workspace when Master Slide, Master Notes or Master Handout are selected. There are no tabs for master views and can only be selected by going to View on the Menu bar.
Note
Each workspace view displays a different set of toolbars when selected. To customize these toolbar sets, go to View > Toolbars on the Menu bar, then check or uncheck the toolbars to add or remove.
Normal view is the main standard view for creating individual slides in a presentation. In Normal view slides are designed, text or graphics added and formatted, and any animation effects added to text or graphics.
To place a slide in Normal view of the Workspace, either click on the slide thumbnail in the Slide Pane or click on the slide name in the Navigator.
Outline view (Figure 8) contains all the slides of the presentation in their numbered sequence. It shows topic titles, bulleted lists, and numbered lists for each slide in outline format. Only the text contained in the default text boxes in each slide is shown. If text boxes or graphic objects have been added to the slides, then these objects are not displayed. Slide names are not included.
Use Outline view for the following tasks:
Make changes in the text of a slide:
Add or delete text in a slide as in Normal view.
Move a paragraph in a slide up or down by using the movement arrows on the Outline toolbar (Figure 7).
Change the outline level of a paragraph in a slide using the left and right arrow buttons on the Outline toolbar.
Compare slides with in an outline. If it is noticed in an outline that another slide is required, create it directly in Outline view, or return to Normal view to create it.
Figure 7: Outline toolbar
Figure 8: Example Outline view in Workspace
Figure 9: Example Notes view in Workspace
Use Notes view (Figure 9) to add notes to a slide. These notes are not seen when the presentation is shown to an audience using an external display connected to a computer. Click on the words Click to add Notes and begin typing.
The Click to add notes text box can be resized using the resizing handles which appear when the edge of the notes box is selected. Move or change the size of the box by clicking and dragging on the box border.
When text is inserted in the Click to add notes text box, it is automatically formatted using the predefined Notes style in Presentation Styles in the Styles deck on the Sidebar. The Notes style can be formatted to the presentation requirements. For more information on editing styles, see Chapter 4, Working with Styles, Templates and Hyperlinks in this guide and the Impress Guide.
Slide Sorter view (Figure 10) contains all the thumbnails of slides used in a presentation. Use this view to work with one slide or a group of slides.
To change the number of slides per row in Slide Sorter view:
1) Go to View > Toolbars > Slide View on the Menu bar to show the Slide View toolbar (Figure 11).
2) Adjust the number of slides, up to a maximum of 15, in the Slides per Row box.
Figure 10: Example Slide Sorter view in Workspace
Figure 11: Slide View toolbar
To change the slide order of one or a group of slides in a presentation using Slide Sorter view:
1) Select a slide or a group of slides.
2) Drag and drop the slide or group of slides at the location required.
To select a group of slides, use one of the following methods:
Ctrl key — click on the first slide and, while holding the Ctrl key (macOS ⌘), select the required slides. The selected slides do not have to be next to each other.
Shift key — click on the first slide, and while holding the Shift key, select the final slide for the group. This selects all of the slides between the first and the last slide selected.
Mouse — position the cursor slightly outside the first slide, then click and hold the left mouse button and drag the cursor until all of slides required for the group are selected.
Working with slides in Slide Sorter view is similar to working with slides in the Slide Pane. To make changes, right-click on a slide in Slide Sorter view and choose one of the following in the context menu:
Cut
Copy
Paste
New Slide
Duplicate Slide
Rename Slide
Hide Slide
Delete Slide
Layout
Move
By default, Impress opens with the Select a Template dialog displayed to select a template for a new presentation. To create a new presentation without a template, click on Cancel in the Select a Template dialog and a blank slide opens in the Workspace and Slides pane. For more information on creating presentations, slide show options, and presentation settings, see the Impress Guide.
Tip
The first thing to do is decide on the purpose of a presentation and plan accordingly. Having an idea of audience type, structure, content, and how the presentation will be delivered, saves a lot of time from the start.
When creating a new presentation, Impress shows only one slide in the Slides pane and Workspace.
To insert a new slide into a presentation, use one of the following methods.
Go to Slide > New Slide on the Menu bar.
Right-click in the Slides pane and select New Slide in the context menu.
Use the keyboard shortcut Ctrl+M.
Go to Slide Sorter view in the Workspace, right-click on a slide and select New Slide in the context menu.
Figure 12: Presentation toolbar
Click on New Slide in the Presentation toolbar (Figure 12). If the Presentation toolbar is not visible, go to View > Toolbars on the Menu bar and select Presentation from the drop‑down list.
Note
A new slide is inserted after the selected slide in the presentation. If a slide is not selected, then the new slide is inserted as the last slide in the presentation.
To duplicate a slide, select a slide for duplication in the Slides pane and use one of the following methods. A duplicate slide is inserted after the selected slide in the presentation.
Right-click on a slide in the Slides pane and select Duplicate Slide in the context menu.
Go to Slide Sorter view in the Workspace, right-click on a slide and select Duplicate Slide in the context menu.
Go to Slide > Duplicate Slide on the Menu bar.
Click on the Duplicate Slide icon on the Presentation toolbar.
Click on Properties on the Sidebar and open the Slide panel (Figure 13) to display the format options available for a presentation. The Slide panel allows for quick formatting of all slides included in a presentation and selecting master slides for a presentation. For more information on formatting slides and using master slides, see the Impress Guide.
The first slide in a presentation is normally a title slide. The layouts Title Slide, which also contains a section for a subtitle, or Title Only are the most suitable layouts for the first slide in a presentation. For the remaining slides, select the most suitable layout to use for the slide contents.
Impress does not have the functionality to create custom layouts. However, the different elements in a slide layout can be resized and moved. For more information, see the Impress Guide.
The available layouts are shown in the Layouts panel on the Properties deck on the Sidebar. After selecting a slide, select the slide layout using one of the following methods:
Go to the Properties deck on the Sidebar to open the Layouts panel (Figure 13).
Click on Slide Layout on the Presentation toolbar to open a pop-up Layouts panel.
Click on Slide > Layout on the Menu bar to open a drop-down list showing the layouts by name.
Right‑click on the selected slide and select Layout in the context menu to open a drop‑down list of slide layouts.
Figure 13: Slide and Layouts panels in Properties deck on Sidebar
Tip
To view the names for slide layouts, use the tooltip feature. Position the cursor on an icon in the Layouts panel (or on any other tool icon) in the Properties deck on the Sidebar and its name is displayed in a small rectangle.
Change the slide layout for a slide in a presentation as follows:
1) Select a slide in the presentation.
2) Select a new layout for the slide using one of the methods described in “Selecting slide layout” above.
Several layouts can contain one or more content boxes. Each of these content boxes can be configured to contain the following elements. For more information on layout content boxes, see the Impress Guide.
Slide title
Text
Table
Chart
Image
Audio or video
Text and graphic elements can be readjusted at any time during the preparation of a presentation. However, changing slide layout that already has contents can have a dramatic effect. If the layout is changed after contents have been added, the contents are not lost, but they may need to be reformatted.
When a slide is inserted into a presentation, it contains elements that were included in the selected slide layout. However, it is unlikely that the predefined layouts suit all requirements for a presentation. Elements required maybe removed, or objects inserted such as text and/or graphics.
Although Impress does not have the functionality to create new layouts, it allows for the resizing and moving of the slide elements. It is also possible to add slide elements without being limited to the size and position of content boxes.
It is recommended that changes to slide elements in the layouts included in Impress are only made using Normal view, which is the default. Attempting any changes to a slide element when in Master view is possible, but may produce unpredictable results. Using Master view requires extra care as well as a certain amount of trial and error.
1) Click on the outer frame of the contents box so that the selection handles are displayed.
2) Place the cursor on the frame so that it changes shape. This is normally a clenched hand, but depends on the computer setup.
3) Click and drag the contents box to its new position on the slide and release.
1) Click on the outer frame of the contents box so that the selection handles are displayed.
2) Place the cursor on the frame so that it changes shape.
3) Click and drag the selection handle on the frame to resize the contents box and release.
Top and bottom selection handles change the height of a contents box.
Left and right selection handles change the width of a contents box.
Corner selection handles change width and height of a contents box.
1) Select a contents box, or an element to highlight it and the selection handles are displayed.
2) Press the Delete or Backspace key to remove the contents box or element.
There are two ways of adding text to a slide — contents box or text box. For more information, see “Adding and formatting text” on page 1 and the Impress Guide.
Contents box
Text box
To add images or objects to a slide, for example a picture, clip art, drawing, photograph, or spreadsheet, click on Insert on the Menu bar and select in the drop-down menu the image or object type required. See “Inserting images, tables, charts, or media” on page 1 and the Impress Guide.
To change the background and other characteristics of all slides in the presentation, the master slide has to be modified or a different master slide selected, as explained in “Working with master slides” on page 1.
A master slide has a specified set of characteristics that acts as a template and is used as the starting point for creating other slides. These characteristics include slide background, objects in the background, formatting of any text used, and any background graphics.
Impress has a range of master slides, which are found in the Master Slides deck on the Sidebar. Additional master slides can be created or and saved, or added from other sources. See the Impress Guide for more information.
Figure 14: Slide Properties dialog — Background page
For example, to change the background of an individual slide or a master slide:
1) Right click on a slide, or master slide, and select Slide Properties from the context menu to open the Slide Properties dialog (Figure 14).
2) Select the Background tab and then select the type of background to use from None, Color, Gradient, Image, Pattern and Hatch.
3) Make a selection from the various properties that are available for each type of background.
4) Click OK to save the change and close the dialog.
For more information on inserting, formatting, and changing a background, see the Impress Guide, or Draw Guide.
By default, a presentation displays all the slides in the same order as they appear in Slide Sorter view on the Workspace. Run the presentation at least once, then answer the following questions:
Are the slides in the correct order? If not, some of the slides have to be moved.
Is the information well spaced and visible to members of an audience at the back of a large room? The audience may not be able to see information at the bottom of a slide, so redesign the presentation to fit the top three-quarters of a screen.
Would an additional slide make a particular point clearer? If so, create another slide.
Are some of the slides unnecessary? Hide or delete the slides not required.
Would animations help some of the slides? This is an advanced technique, but remember that too many animations may not create a good presentation.
Is the slide transition the same for all sides? Varying transitions can improve a presentation.
Once the questions have been answered, make the necessary changes. Making changes can be carried out in Slide Sorter view on the Workspace. For more information on running a presentation, see the Impress Guide.
Most of the slides in a presentation are likely to contain some text. This section gives some guidelines on how to add text and change its appearance. Text used in slides is contained in text boxes. For more information on adding and formatting text, see the Impress Guide.
Two types of text boxes (AutoLayout text box and text box) are available in Impress for use on slides. Both types of text boxes can be moved, resized, and deleted.
Choose a predefined layout from the Layouts panel on the Properties deck on the Sidebar and do not select any special content type. These text boxes are called AutoLayout text boxes.
Use Insert Text Box for horizontal text, or Insert Vertical Text for vertical text on the Standard toolbar, Drawing toolbar, or Text toolbar (Figure 15) to create text boxes on a slide.
Use the keyboard shortcut F2 to create text boxes on a slide for horizontal text.
When adding and formatting text, the Text Formatting toolbar (Figure 16) normally opens, automatically providing a range of tools to add and format text.
Note
If the toolbars are not visible, go to View > Toolbars on the Menu bar and select the required toolbars in the drop-down list.
Figure 15: Text toolbar
Figure 16: Text Formatting toolbar
Note
The area fill and borders in AutoLayout text boxes and text boxes can be edited using the same methods that are used for graphic objects. For more information, see the Impress Guide.
AutoLayout text boxes are automatically created when one of the slide layouts available in Impress is selected.
1) Make sure Normal view is selected in the Workspace.
2) Select the slide where text is to be added into an AutoLayout text box.
3) Click on Click to add Title or Click to add text in an AutoLayout text box. The text automatically disappears and is replaced by a flashing text cursor. The Text Formatting toolbar automatically opens replacing the Line and Filling toolbar.
4) Type or paste text into the AutoLayout text box and, if necessary, format the text to the presentation requirements.
5) Click outside the AutoLayout text box to deselect it.
1) Make sure Normal view is selected in the Workspace.
2) Select the slide where the text is to be added.
3) For horizontal text: click on the selected slide and create a text box using one of the following methods:
Single line text box — select Insert Text Box, click on the slide and then type or paste the text. The width of the text box increases as text is added creating a single line of horizontal text.
Single line text box — use the keyboard shortcut F2, click on the slide and then type or paste the text. The width of the text box increases as text is added creating a single line of horizontal text.
Multiple line text box — select Insert Text Box, or use the keyboard shortcut F2, click on the slide and drag to the approximate width required for the text box, then type or paste the text into the text box. The width of the text box is fixed and the height of the text box increases automatically as text is added creating multiple lines of horizontal text.
Multiple line text box from a single line text box — use the Enter key to create a new paragraph, or the keyboard combination Shift+Enter to create a line break in the text.
Figure 17: Example of a text box in edit mode
4) Select the text box to switch on edit mode. This is indicated by a colored border as shown in by the example in Figure 17. The width and final position of the text box can be adjusted after adding text into the text box.
5) Click outside the text box to deselect it.
In addition to normal text boxes, where text is horizontally aligned, it is possible to insert text boxes where the text is vertically aligned. Vertical text is available only when Asian languages are selected in Tools > Options > Language Settings > Languages (macOS LibreOffice > Preferences > Language Settings > Languages).
Creating vertical text boxes is similar to creating horizontal text boxes. Use the Insert Vertical Text tool on the Standard, Drawing, or Text toolbars to create a vertical text box with single or multiple lines of text. See “Text boxes” on page 1 on how to create a text box for single or multiple lines of text.
To quickly increase or decrease the font size of selected text by using the tools Increase Font Size (Ctrl+]) (macOS ⌘+]) and Decrease Font Size (Ctrl+[) (macOS ⌘+[) on the Text Formatting toolbar. The amount by which the font size changes depends on the standard sizes available for the font in use.
Note
AutoLayout text boxes automatically adjust font size of any text inserted into the box. For example, if a long piece of text is inserted into an AutoLayout text box, the font size may decrease in size to fit into the box.
Text can be added to an AutoLayout, or normal text box, by copying it from another document and pasting it into Impress. The formatting of pasted text will probably not match the formatting of the surrounding text, or that of the other slides in the presentation. This maybe what is required on some occasions. However, to make sure that the presentation style is consistent and does not become a patchwork of different styles, font types, bullet points, and so on, the text has to be formatted to match the rest of the presentation.
It is good practice to paste text without formatting and apply the formatting later.
1) Highlight and copy the text from another document or slide.
2) Create a text box on a slide and make sure the text cursor is flashing in the text box. Alternatively, select an AutoLayout text box on a slide. See “Text boxes” on page 1 and see “AutoLayout text boxes” on page 1 and the Impress Guide for more information.
3) Paste unformatted text into the text box using one of the following methods. Text is pasted at the cursor position in the text box formatted using the Default Drawing Style, or Presentation Style if text was pasted into an AutoLayout text box.
Go to Edit > Paste Special > Paste Unformatted Text on the Menu bar.
Click on the triangle ▼to the right of the Paste tool on the Standard toolbar and select Unformatted Text in the context menu.
Use the keyboard shortcut Ctrl+Shift+V (macOS ⌘+Shift+V) and select Unformatted text on the dialog that opens.
4) Format the text to the presentation requirements using the tools on the Text Formatting toolbar, or the options in Format on the Menu bar.
Note
The Presentation style used in AutoLayout text boxes cannot be changed by selecting another presentation style. Make sure the AutoLayout text box uses the presentation style required. Change outline levels and outline styles using the Tab key or Shift+Tab key combination. See the Impress Guide for more information.
If text is being pasted into an AutoLayout text box, the appropriate outline style has to be applied to the text giving it the same look and feel as the rest of the presentation.
1) Highlight and copy the text from another document or slide.
2) Paste the text into the AutoLayout text box, then select the pasted text.
3) Select Format > Clear Direct Formatting on the Menu bar, or use the keyboard shortcut Ctrl+Shift+M (macOS ⌘+Shift+M) to make sure any formatting is removed from the pasted text.
4) Use the four arrow buttons on the Outline toolbar to move the text to the appropriate position and give it the appropriate outline level.
Left arrow promotes a list entry by one level (for example from Outline 3 to Outline 2). Alternatively, place the cursor at the beginning of the paragraph and use the Shift+Tab keys.
Right arrow demotes a list entry by one level. Alternatively, place the cursor at the beginning of the paragraph and use the Tab key.
Up arrow moves a list entry up in the list order.
Down arrow moves a list entry down in the list order.
5) If necessary, modify the presentation style to format the text to the presentation requirements to change font attributes, tabs, and so on. See the Impress Guide for more information. Alternatively, apply any necessary manual or direct formatting to the text.
Pasting formatted text into a text box overwrites any formatting and replaces the text box style.
1) Highlight and copy the text from another document or slide.
2) If necessary, create a text box on a slide and make sure the text cursor is flashing in the text box. See “Text boxes” on page 1 and the Impress Guide for more information.
3) Paste formatted text into the text box. Text is pasted at the cursor position in the text box and the text formatting of the pasted text overwrites any style formatting of the text box.
4) Select Format > Clear Direct Formatting on the Menu bar or use the keyboard shortcut Ctrl+Shift+M (macOS ⌘+Shift+M) to make sure any formatting is removed from the pasted text.
5) Select the required drawing style to format the text from the available drawing styles.
6) If necessary, modify a drawing style or create a new drawing style to format the text to the presentation requirements. See the Impress Guide for more information.
Note
Drawing styles can be created in Impress and are only available for the presentation which is being created and has been saved. Templates can also be created that include any drawing styles required. For more information, see the Impress Guide.
The procedure to create an unordered (bulleted) or ordered (numbered) list varies depending on the type of text box used. The tools to manage and format a list are the same. To change the appearance of a list, see “Changing list type” on page 1.
In AutoLayout text boxes and by default, the outline styles available are unordered lists. An example of these outline styles is shown in Figure 18. These outline styles are presentation styles and cannot be deleted, but can be modified or updated to the presentation requirements. See the Impress Guide for more information.
Create a slide using an AutoLayout text box with an unordered list as follows:
1) Go to View > Normal on the Menu bar to open Normal view.
2) Select a layout for the slide using one of the following methods:
Right-click in a blank area on the slide and select a layout in the context menu.
Go to Slide > Layout on the Menu bar and select a layout in the drop-down list.
Select a layout in the Layouts panel on the Properties deck in the Sidebar.
3) Click on the text ● Click to add Text and start typing the first list item.
4) Press Enter to start a new list point or use the keyboard combination Shift+Enter to start a new line without creating a new list point. The new line will have the same indentation as the list point.
Figure 18: Example of outline levels in AutoLayout text box
Tip
To switch off bullets altogether, click on Toggle Unordered List on the Text Formatting toolbar.
In AutoLayout text boxes, change the outline level as follows:
1) To demote the outline level of a list point, use one of the following methods:
Press the Tab key.
Click on Demote to demote outline level of selected paragraphs on the Outline toolbar, or the Lists panel on the Properties deck in the Sidebar.
Go to Format > Lists on the Menu bar and select Demote in the submenu.
Use the keyboard shortcut Alt+Shift+Right Arrow (macOS ⌥+Shift+Right Arrow)
2) To promote the outline level of a list point, use one of the following methods:
Use the keyboard shortcut Shift+Tab.
Click on Promote to promote outline level of selected paragraphs on the Outline toolbar, or the Lists panel on the Properties deck in the Sidebar.
Go to Format > Lists on the Menu bar and select Promote in the submenu.
Use the keyboard shortcut Alt+Shift+Left Arrow (macOS ⌥+Shift+Left Arrow)
3) To move a list point lower in the list order without changing the outline level, use one of the following methods:
Click on Move Down to move selected paragraphs down one paragraph on the Outline toolbar, or the Lists panel on the Properties deck in the Sidebar.
Go to Format > Lists on the Menu bar and select Move Down in the submenu.
Use the keyboard shortcut Alt+Shift+Down Arrow (macOS ⌥+Shift+Down Arrow).
4) To move a list point higher in the list order without changing the outline level, use one of the following methods:
Click on Move Up to move selected paragraphs up one paragraph on the Outline toolbar, or the Lists panel on the Properties deck in the Sidebar.
Go to Format > Lists on the Menu bar and select Move Up in the submenu.
Use the keyboard shortcut Alt+Shift+Up Arrow (macOS ⌥+Shift+Up Arrow).
Note
In AutoLayout text boxes, promoting or demoting an item in the list corresponds to applying a different outline style. The second outline level corresponds to Outline 2 style, the third outline level to Outline 3 style, and so on. A change in level and style produces other changes, for example, to font size, bullet type, and so on.
Create an unordered or ordered list in a text box as follows:
1) Create a text box on a slide and make sure the cursor is flashing in the text box. See “Text boxes” on page 1 on how to create a text box.
2) Create a list using one of the following methods:
Click on Toggle Unordered List or Toggle Ordered List on the Text Formatting toolbar.
Click on Toggle Unordered List or Toggle Ordered List in the Lists panel on the Properties deck in the Sidebar.
Go to Format > Lists on the Menu bar and select Unordered List or Ordered List in the submenu.
3) Type the text and press Enter to start a new list point or use the keyboard combination Shift+Enter to start a new line without creating a new list point. The new line will have the same indentation as the list point.
4) To increase or decrease the indent level of a list point, or move a list point up or down, see “Changing outline level” on page 1.
The list type can be changed for an unordered or ordered type for the entire list or for a single point only as follows:
1) Select a point in a list, or select the entire list in the text box. Alternatively, click on the border of the text box so that the resizing handles are displayed to select the entire list.
2) Change the list type from unordered to ordered list, or ordered to unordered as described in “Text boxes” above.
3) If required, change the type of bullet or number used for the list:
a) Click on the triangle ▼ to the right of the Toggle Unordered List, or Toggle Ordered List, on the Text Formatting toolbar, or the Lists panel on the Properties deck in the Sidebar.
b) Select a bullet or number type from the options available in the drop-down window as shown in Figure 19, or Figure 20.
Figure 19: Available bullet list types
Figure 20: Available numbering list types
c) If necessary, click on More Bullets, or More Numbering, in the drop-down window to open the Bullets and Numbering dialog for further options to change the list appearance. See the Impress Guide for more information.
The bullet, or number format used in a list can be changed for the entire list, or for a single point only as follows:
1) Select a point in a list, or select the entire list in the text box. Alternatively, click on the border of the text box so that the resizing handles are displayed to select the entire list.
2) Click on the triangle ▼ to the right of the Toggle Unordered List, or Toggle Ordered List, on the Text Formatting toolbar, or the Lists panel on the Properties deck in the Sidebar to open a drop-down dialog displaying the format options available.
3) Select a bullet or number type from the options available in the drop-down window as shown in Figure 19, or Figure 20.
4) If necessary, click on More Bullets, or More Numbering, in the drop-down window to open the Bullets and Numbering dialog for further options to change the list appearance. See the Impress Guide for more information.
Note
The Bullets and Numbering dialog can also be opened by going to Format > Bullets and Numbering on the Menu bar, or by right-clicking on a list point and selecting Bullets and Numbering from the context menu.
Note
If a list was created in an AutoLayout text box, then the Outline styles can be modified to change the list type and/or format. Changes made to an Outline style apply to all the slides that use that style. See the Impress Guide for more information.
The type of columns used in Impress are continuous flow columns. This means that when text reaches the bottom of a column, it automatically flows into the next column as text is added. This type of columns is also known as newspaper columns.
Note
Text in a presentation can be formatted into columns inside text boxes and objects. However, columns cannot be used on separate parts of text inside a text box or object. The whole of the text box or object has to be used for columns.
1) Columns in text boxes and graphic objects are created as follows:
For text boxes — click the border of a text box to select it so that the selection handles are displayed indicating that the text box is in edit mode.
For graphic objects — double-click on a graphic object to select it so that the selection handles are displayed and the cursor flashes in the center of the object indicating that the object is in text edit mode.
2) Open the options for text columns using one of the following methods:
Right-click in the text box or graphic object and select Text Attributes in the context menu to open the Text dialog, then click on the Text Columns tab to open the Text Columns page (Figure 21),
Click on Columns in Properties on the Sidebar to open the Columns panel (Figure 22).
3) Set the number of columns required in the Number of columns box and the required spacing between the columns in the Spacing box.
Figure 21: Text dialog — Text Columns page
Figure 22: Columns panel in Properties deck on Sidebar
4) Save the changes and deselect the text box, or graphic object, using one of the following methods:
For the Text dialog, click OK to save the changes and close the dialog, then click outside the text box, or graphic object, to deselect it.
For the Columns panel in the Properties deck on the Sidebar, click outside the text box, or graphic object, to deselect it and save the changes.
5) Type in the required text or use copy and paste to enter the required text into the text box, or graphic object. Any text entered will be in column format.
6) If necessary, format the text to the presentation requirements.
7) Click outside the text box, or graphic object, to deselect it and save the changes.
Note
Any text inside a text box, or graphic object, automatically flows into column format when the changes are saved.
A contents box on a slide can contain images, tables, charts, or media as well as text. The Insert toolbar (Figure 23) provides quick access to relevant tools. This section provides an overview of how to work with these objects. For more information, see the Impress Guide.
1) Open the slide in Normal view on the Workspace where the image is going to be inserted.
2) Open the Insert Image file browser using one of the following methods:
Go to Insert > Image on the Menu bar.
Click on Insert Image on the Insert toolbar (Figure 23).
Click on Insert Image on the Standard toolbar.
3) Navigate to the location of the file and select the image file required.
4) Click Open to place the image in the center of the slide.
5) Reposition and resize the image to the presentation requirements.
When a table is inserted into a slide, the Table toolbar (Figure 24) automatically opens. The Table toolbar in Impress offers the same functions as the Table toolbar in Writer, with the exception of the calculation functions Sort and Sum. To use Sum and Sort in a presentation, a Calc spreadsheet has to be inserted into the slide.
Figure 23: Insert toolbar
Figure 24: Table toolbar
Figure 25: Insert Table dialog
Note
If the Table toolbar does not automatically open, go to View > Toolbars on the Menu bar and select the Table toolbar.
Entering data into table cells is similar to working with text box objects. Click in a cell and begin typing. To move around cells quickly, use the following keyboard options:
Use the arrow keys to move the cursor to another cell if the cell is empty, or to the next character if the cell already contains text.
Press the Tab key to move to the next cell on the right, or press Shift+Tab to move to the next cell on the left.
1) Open the slide in Normal view on the Workspace and go to Insert > Table on the Menu bar to open the Insert Table dialog (Figure 25).
2) Select the Number of columns and the Number of rows required for the table.
3) Click OK to place the table in the center of the slide and close the Insert Table dialog.
4) The Table Design panel on the Properties deck on the Sidebar opens (Figure 26). Select a table design, the type of rows, and the type of columns required.
5) If necessary, reposition and format the table on the slide to the presentation requirements.
1) Open the slide in Normal view on the Workspace and click on Table on the Insert toolbar or the Standard toolbar to open the Insert Table Grid (Figure 27).
Figure 26: Table Design panel in Properties deck on Sidebar
Figure 27: Insert Table Grid
2) Click and drag the cursor to create the number of columns and rows required, then click to place the table in the center of the slide and the Insert Table Grid closes.
3) The Table Design panel on the Properties deck in the Sidebar opens (Figure 26). Select a table design, the type of rows, and the type of columns from the options available.
4) If necessary, reposition and format the table on the slide to the presentation requirements.
Note
Select More Options at the bottom of the Insert Table grid (Figure 27) to open the Insert Table dialog (Figure 25) where the number of rows and columns required can be selected.
To insert a chart into a selected slide in Normal view on the Workspace, use one of the following methods:
Go to Insert > Chart on the Menu bar.
Click on Insert Chart on the Insert toolbar.
When Impress switches to chart view, the Formatting toolbar (Figure 28) automatically opens, and the Chart Type panel on the Properties deck on the Sidebar opens (Figure 29). To change the chart type, insert the required data, and change the formatting, see the Impress Guide and the Calc Guide.
Figure 28: Formatting toolbar
Figure 29: Chart Type panel in Properties deck on Sidebar
Figure 30: Gallery deck in Sidebar
1) Go to Insert > Audio or Video on the Menu bar, or click on Insert Audio or Video on the Insert toolbar and the Insert Audio or Video file browser opens.
2) Navigate to the folder where the file is located and select the audio or video file you want to insert onto a slide. Only the audio and video files that are compatible with Impress will be highlighted in the file browser.
3) Click Open to place the audio or video file in the center of the slide. The Media Playback toolbar opens while the audio or video file is selected.
4) Reposition and/or resize the audio or video file. See the Impress Guide for more information.
1) If the Gallery deck (Figure 30) is not already open, use one of the following methods:
Go to View > Sidebar on the Menu bar to open the Sidebar, then select Gallery.
Go to View > Gallery on the Menu bar.
2) Browse to a category containing media files, for example Sounds.
3) Click on the audio or video file required and drag it onto the slide. The Media Playback toolbar automatically opens.
4) Reposition and/or resize the audio or video file. See the Impress Guide for more information.
Graphics, such as shapes, callouts, and arrows, are often useful to complement the text on a slide. These objects are handled much the same way as graphics in Draw. For more information on inserting graphics, see Chapter 7, Getting Started with Draw in this guide, the Impress Guide, or the Draw Guide.
Spreadsheets embedded in Impress include most of the functionality of Calc spreadsheets and are capable of performing complex calculations and data analysis. If the data has to be analyzed or formulas applied, then these operations are best performed in a Calc spreadsheet and the results displayed in an embedded Calc spreadsheet or in an Impress table. For more information on spreadsheets, see the Impress Guide and the Calc Guide.
Object Linking and Embedding (OLE) is a software technology that allows linking and embedding of spreadsheets, charts, drawings, formulas, and text files into an Impress presentation.
The major benefit of using OLE objects is that it provides a quick and easy method of editing the object using tools from the software used to create the object. These file types can all be created using LibreOffice and OLE objects can be created from new or from an existing file.
When inserting a new OLE object into a presentation, it is only available in that presentation and can only be edited using Impress. For more information on inserting and formatting OLE objects, see the Impress Guide.
A master slide is a slide that is used as the starting point for other slides. It is similar to a page style in LibreOffice Writer as it controls the basic formatting of all slides based on it. A presentation can have more than one master slide.
A master slide has a defined set of characteristics, including the background color, graphics, or gradients. It also can include objects (for example, logos, decorative lines) in the background; headers and footers; placement and size of text frames; and text formatting.
All of the characteristics of master slides are controlled by styles. The styles of any new slide created are inherited from the master slide from which it was created. In other words, the styles of the master slide are available and applied to all slides created from that master slide. Changing a style in a master slide results in changes to all the slides based on that master slide. It is possible to modify each individual slide without affecting the master slide.
Master slides have two types of styles — presentation styles and drawing styles. The presentation styles included with Impress can be modified, but new presentation styles cannot be created or deleted. The drawing styles included with Impress can be modified, but cannot be deleted. However, new drawing styles can be created and these drawing styles can be deleted.
Note
It is highly recommended to use the master slides whenever possible. However, there are occasions where manual changes are needed for a particular slide, for example editing an individual slide to enlarge the chart area when the text and chart layout is used.
Impress comes with a collection of master slides, which are are shown on the Master Slides deck of the Sidebar (Figure 31).
This deck has three panels: Used in This Presentation, Recently Used, and Available for Use. Click the expand marker on the title bar of a panel to expand it and show thumbnails of the master slides, or click the collapse marker to collapse the panel to hide the thumbnails.
Each of the master slides shown in the Available for Use panel are from templates that are available in LibreOffice Impress:
Presentation templates included when LibreOffice is installed on a computer.
Templates have been created, or added from other sources.
If a new presentation is created without using one of the templates available, then a default master slide is available. This default master slide is a good starting point for creating master slides. An example of the default master slide is shown in Figure 32.
Figure 31: Master Slides deck on Sidebar
Figure 32: Default Master Slide
Figure 33: Master View toolbar
1) Go to View > Master Slide on the Menu bar to open Master view in the Workspace. The Master View toolbar also opens (Figure 33). If the Master View toolbar does not open, go to View > Toolbars on the Menu bar and select Master View.
2) Create a new master slide using one of the following methods and the new master slide appears in the Slides pane:
Click on New Master in the Master View toolbar.
Right-click on a master slide in the Slides pane and select New Master in the context menu.
Go to Slide > New Master on the Menu bar.
3) Rename the new master slide using one of the following methods to open the Rename Master Slide dialog:
Click on Rename Master on the Master View toolbar.
Right-click on the new master slide in the Slides Pane and select Rename Master in the context menu.
4) Enter a memorable name for the new master slide in the Name text box, then click OK to save the changes and close the dialog.
5) Make sure the new master slide is selected in the Slides pane and add all the text, graphics and master elements that are required. For more information on adding, editing, formatting and managing the different types of objects on a master slide, see the Impress Guide.
6) When the new master slide has been created, use one of the following methods to return to Normal view:
Click Close Master View on the Master View toolbar.
Go to View > Normal on the Menu bar.
7) Save the presentation file before continuing.
To apply a master slide to all slides or selected slides in a presentation:
1) Click on Master Slides on the right of the Sidebar to open the Master Slides deck (Figure 31 above).
2) Right-click on the required master slide in the Used in This Presentation panel.
3) Select Apply to All Slides, or Apply to Selected Slides in the context menu.
Figure 34: Available Master Slides dialog
In a presentation, it maybe necessary to mix multiple master slides that belong to different templates (for more information on templates, see the Impress Guide). For example, a completely different layout for the first slide of the presentation maybe required, or a slide from a different presentation maybe added to the current presentation.
1) Select the slide or slides on the Slides pane where the master slide is to be changed.
2) Go to Slide > Change Slide Master on the Menu bar to open the Available Master Slides dialog (Figure 34).
3) To add master slides, click on Load to open the Load Master Slide dialog (Figure 35).
4) In the Load Master Slide dialog, select the template category and the template to load as the master slide
5) Click OK to close the Load Master Slide dialog and the master slides from the selected template appear in the Available Master Slides dialog.
6) In the Available Master Slides dialog, select the master slide required in the Select a Slide Design box.
7) To apply the selected master slide to all slides in the presentation, select the Exchange background page check box. To apply the slide design to the selected slides only, deselect the Exchange background page check box.
8) Click OK to apply the selection to the slides and close the dialog.
Figure 35: Load Master Slide dialog
Note
The master slides in the template selected are now shown in the Available for use panel on the Master Slides deck on the Sidebar.
The following items can be changed on a master slide. For more information, see the Impress Guide:
Background (color, gradient, hatching, or bitmap).
Background objects (for example, adding a logo or decorative graphics).
Text attributes for the main text area and notes.
Size, placement, and contents of header and footer elements to appear on every slide.
Size and placement of default frames for slide titles and content.
To modify a master slide as follows:
1) Select View > Master Slide on the Menu bar. This also opens the Master View toolbar.
2) Select a master slide for editing in the Slides pane so that it appears in the Workspace.
3) Go to Slide > Slide Properties on the Menu bar or right-click in the Workspace and select Slide Properties in the context menu to open the Slide Properties dialog (Figure 36).
Figure 36: Slide Properties dialog
4) Use the various options in the Slide, Background, and Transparency pages in the Slide Properties dialog to make changes to the format of the master slide.
5) Click OK to save the changes and close the Slide Properties dialog.
6) Select an object on the master slide, then right-click on the object to open a context menu.
7) Select one of the options in the context menu to edit the object. Selecting an option may open another context menu, a dialog, an application or file browser window to make the necessary changes to the selected object.
8) Click Close Master View on the Master View toolbar or go to View > Normal on the Menu bar to exit from editing master slides.
9) Save the presentation file before continuing.
Notes
Any changes made to one slide when in Master Slide mode appears on all slides using this master slide. Always make sure to close Master Slide and return to Normal view before working on any of the presentation slides.
The changes made to an element on a slide in Normal view is not overridden by subsequent changes to the master slide. However, sometimes it is desirable to change a manually modified element of a slide to the style defined in the master slide. To change to default formatting, select the element and select Format > Clear Direct Formatting on the Menu bar.
Text, footers, or fields can be added to a master slide so these elements appear on every slide in a presentation. Headers are not normally added to slides.
1) Go to View > Master Slide on the Menu bar to open Master View.
2) Insert a text box on the master slide, see “Text boxes” on page 1 for more information.
3) Type or paste the text into the text box.
4) Click outside the text box when finished adding text.
5) Go to View > Normal on the Menu bar or click Close Master View on the Master View toolbar when finished.
By default, a slide footer consists of three sections, each containing a default field:
Left section — date and time, labeled Date Area. Field name is <date/time>.
Center section — footer text, labeled Footer Area. Field name is <footer>. This section could be the presentation title, file name, or other information.
Right section — slide number, labeled Slide Number Area. Field name is <number>.
The default footer fields are set up as follows using the Header and Footer dialog (Figure 37):
1) Go to View > Master Slide on the Menu bar to open Master View.
2) Go to Insert > Header and Footer on the Menu bar to open the Header and Footer dialog.
3) Click on the Slides tab to open the options available for inserting footers onto a slide.
4) Select Date and Time for the date and time to appear in the left section of the footer.
For a fixed date and time, select Fixed and enter the date required in the Fixed text box.
Figure 37: Header and Footer dialog — Slides page
For a variable date and time, select Variable, then select the format and language in the Format and Language drop-down lists. Using a variable date and time means that each time the presentation is opened, the date and time are updated.
5) To place text in the footer center section, select Footer and then type or paste the text into the Footer text input field.
6) To place the slide number in the right section of the footer, select Slide number.
7) If the footer is not going to appear on the first slide of a presentation, select Do not show on the first slide. The first slide is normally the title slide of a presentation.
8) Click Apply to save the changes and close the Header and Footer dialog.
9) To format the text used for the default footer fields, see the Impress Guide.
10) Click Close Master View on the Master View toolbar, or go to View > Normal on the Menu bar when setting up the default footer fields is completed.
Note
The default sections in a footer can be formatted, resized, and repositioned. See “Adding and formatting text” on page 1 for more information.
The default fields in a footer section can be replaced with text, or manual fields as follows:
1) Go to View > Master Slide on the Menu bar to open the master slide view.
2) Highlight the default field in the footer section and press the Delete or Backspace key. A flashing text cursor will appear in the footer section and the Text Formatting toolbar automatically opens replacing the Line and Filling toolbar.
3) Type in the required text or insert a manual field into the footer section. For more information, see “Manual fields” on page 1.
4) Format the text or manual field placed in the footer section. See “Adding and formatting text” on page 1 and the Impress Guide for more information.
5) Click outside the footer section to close the Text Formatting toolbar and reopen the Line and Filling toolbar.
6) Click Close Master View on the Master View toolbar or go to View > Normal on the Menu bar when setting up a custom footer section is completed.
Manual fields can be added as text objects on a master slide or replace one of the default footer fields and are as follows:
Date (fixed)
Date (variable) — updates automatically each time the presentation is opened.
Time (fixed)
Time (variable) — updates automatically each time the presentation is opened and each time a slide is opened more than once during a presentation.
Author — first and last names listed in the LibreOffice user data.
Slide number — the sequence number of the slide, without the word “Slide”.
Slide Title — defaults to Slide 1, Slide 2, and so on if the slides have not been renamed.
Slide Count — the number of slides in the presentation.
File Name
Figure 38: Adding a comment
Impress supports comments similar to those in Writer and Calc. For more about adding, navigating, and replying to comments, see Chapter 2, Getting Started with Writer.
Before using comments, make sure that the user name and initials are entered into Tools > Options > LibreOffice > User Data (macOS LibreOffice > Preferences > LibreOffice > User Data). The name and initials then appear in the comment marker and in the Author field of the comment. If more than one person edits the document, each person is automatically allocated a different background color.
1) In Normal View, go to Insert > Comment on the Menu bar or use the keyboard shortcut Ctrl+Alt+C to open a blank comment (Figure 38).
2) Move the small comment markers to the required position on the slide. Normally, this is on or near the text or object being referred to in the comment.
3) To show or hide the comment markers, choose View > Comments on the Menu bar.
4) Select Tools > Options > LibreOffice > User Data to configure the name and initials that appear in comments.
Note
A small box containing the user initials appears in the upper left-hand corner of the slide, with a larger text box beside it. Impress automatically adds the user name and current date at the bottom of the text box.
Handouts are used for distributing copies of presentation slides to each member of the audience. Handouts are only available in View > Handout on the Menu bar and are printed using the printing options in Impress.
The printing of handouts depends on the printer, computer operating system, and how a computer is set up. The following is only an example of how to print handouts.
Figure 39: Example of Master Handout layout
1) Go to View > Master Handout on the Menu bar to open the Master Handout layout in the Workspace. An example Master Handout is shown in Figure 39.
2) Go to Insert > Header and Footer on the Menu bar to open the Header and Footer dialog (Figure 40).
3) Click on Notes and Handouts tab and select the required header and footer options as follows:
Select Header then enter text in the Header text: text box.
Select Date and time then select either Fixed or Variable for the date and time.
If a fixed date and time was selected, enter the date and/or time in the text box.
If a variable date and time was selected, select the Format for the date and time in the drop-down list.
If a variable date and time was selected, select the Language to set the options for the date and time format in the drop-down list.
Select Footer then enter text in the Footer text: text box.
Select Page Number if the handout pages are to be numbered.
4) Click on Apply to All to save the options for the handouts and close the Header and Footer dialog.
Figure 40: Header and Footer dialog — Notes and Handouts page
Figure 41: Example Print dialog — LibreOffice Impress page
5) Go to File > Print on the Menu bar or use the keyboard shortcut Ctrl+P (macOS ⌘+P) to open the Print dialog and click on the LibreOffice Impress tab to open the page for printing options of handouts. An example Print dialog for LibreOffice Impress is shown in Figure 41.
6) In Document, select the required options in the drop-down lists as follows:
Type: – select Handouts in the drop-down list.
Slides per page: – select how many slides are printed on a sheet of paper.
Order: – select the order in which the slides are printed on a sheet of paper.
7) In Contents, select Slide name, Date and time, and/or Hidden pages if these items are to be printed.
8) In Color, select how the handouts are printed.
9) In Size, select the size for how the handouts are printed.
10) Click on Print to print the handouts and close the Print dialog.
Impress can create a photo album from a set of photographs and images. The photo album can be a multimedia show with vacation pictures and/or graphics and images as a presentation file.
1) Create a new presentation or open an existing presentation.
2) Select the slide that is going to precede the photo album. In a new presentation, this will be the first slide.
3) Go to Insert > Media > Photo Album on the Menu bar to open the Create Photo Album dialog (Figure 42).
4) Click on Add to open a file browser and navigate to the folder where the images are located.
5) Select the images required and click Open. This closes the file browser and the selected files appear in the Create Photo Album dialog.
6) Select the number of images per slide in the Slide layout: drop-down list.
7) If required, select Add caption to each slide. This inserts a text box on each slide allowing captions to be added to the images.
8) If required and there is only one image per slide, select Fill Screen for each image to fill the entire slide.
9) Create the required sequence of photos or pictures by moving image files up or down in the list of images.
10) When the sequence of images is ready, click Insert Slides to create the number of slides required for the photo album. The sequence can be changed later.
11) If required, copy and paste images between slides as with any other elements that can be placed on a slide.
12) If required, set up the photo album to run as a presentation. See “Presentations (slide shows)” below, “Running presentations” on page 1, and the Impress Guide.
Figure 42: Create Photo Album dialog
Impress allocates reasonable default settings for presentations, while at the same time allowing for customizing many aspects of the presentation experience. This section provides an introduction to presentations. For more information on creating, formatting and running presentations, see the Impress Guide.
Most of the tasks are best done in Slide Sorter view in the Workspace where the majority of the slides in a presentation can be viewed. Go to View > Slide Sorter on the Menu bar or click on the Slide Sorter tab at the top of the Workspace.
There maybe more slides than the time available for a presentation, or only a brief overview is required first and then a more detailed presentation at a later date. Impress provides two tools for this: hiding slides and custom slide shows.
1) Select slides for hiding in the Slides pane, or Slide Sorter view in the Workspace.
2) Hide the selected slides using one of the following methods. Hidden slides are grayed out in the Slides pane or Slide Sorter view in the Workspace.
Go to Slide > Hide Slide on the Menu bar.
Right-click on the slide thumbnail and select Hide Slide in the context menu.
Click on Hide Slide in the Slide View toolbar.
3) To show a hidden slide, use one of the following methods.
Go to Slide > Show Slide on the Menu bar.
Right-click on the hidden slide thumbnail and select Show Slide in the context menu.
Click on Show Slide in the Slide View toolbar.
1) Select the slides required for a custom slide show in the Slides pane or Slide Sorter view in the Workspace.
2) Go to Slide Show > Custom Slide Show on the Menu bar to open the Custom Slide Shows dialog (Figure 43).
3) Click on New and the Define Custom Slide Show dialog opens (Figure 44).
4) Type a name for the new custom slide show in the Name text box.
5) In the Existing slides list, select the slides to include in the show.
6) Click the >> button to include the slides in the Selected slides list. Several slides can be selected and included at the same time. Hold down the Shift key and click the first and last slide in a group to select that group, or hold down the Ctrl key (macOS ⌘)and click on individual slides to select them.
7) If required, rearrange the slide order in the Selected slides list. Click on a slide name and drag it to a new position in the list, then release the mouse button.
Figure 43: Custom Slide Shows dialog
Figure 44: Define Custom Slide Show dialog
8) Click OK to save the custom slide show and return to the Custom Slide Shows dialog.
9) To activate a custom show, select it in the list in the Custom Slide Shows dialog and then select the Use custom slide show option.
10) Click Start to test the custom slide show or click OK to close the Custom Slide Shows dialog.
Slide transitions are effects and/or sounds that take place between slides when slides change in a presentation and can add a professional look to a presentation, smoothing the change over between slides. For more information on how to setup slide transitions, modify slide transitions, and to advance slides in a presentation, see the Impress Guide.
1) Click on Slide Transition in the Sidebar to open the Slide Transition deck (Figure 45).
Figure 45: Slide Transition deck in Sidebar
2) In the Slides pane or Slide Sorter view in the Workspace, select the slides where slide transitions are going to be applied.
3) Select a transition from the available options in the Slide Transition panel.
4) In the Modify Transition panel, select from the following options to modify the selected transition:
Variant — if available, select a slide transition variant from the options available in the drop-down list.
Duration — enter a duration time in seconds for slide transition.
Sound — from the options available in the drop-down list, select a sound or music, to be played during slide transition.
5) To apply the same transition to all slides in the presentation, click Apply Transition to All Slides at the bottom of the Slides Transition deck.
6) To check how the transition looks, click Play at the bottom of the Slides Transition deck. Alternatively, to automatically preview how the transition looks when it is applied, select Automatic Preview at the bottom of the Slides Transition deck.
7) In the Advance Slide section, select how the slides change in a presentation.
On mouse click — each time the mouse is clicked, the presentation advances to the next slide.
Automatically after — enter a time in box to elapse before the next slide in the presentation advances into view.
Sound or music can be played during a presentation as a transition effect. When using music in a presentation, make sure any copyright or license for the music is not being infringed.
1) Click on Slide Transition on the Sidebar to open the Slide Transition deck.
2) In the Slides pane, or Slide Sorter view in the Workspace, select the slide to add sound or music.
3) In the Modify Transition panel, select a sound in the Sound drop-down list.
4) To play music, use the following steps to select a music file:
a) Select Other sound in the Sound drop-down list.
b) In the file browser window that opens, navigate to where the music file is located.
c) Select the music file required and click Play to check if the music is suitable.
d) If the music is suitable, click Open to add the music to the selected slide and close the file browser window.
5) To play a sound or music file continuously in the slide show, select the option Loop until next sound. The sound or music file restarts once it is finished until the next sound or music file that is inserted in the slide show.
Notes
Do not select the Apply Transition to All Slides option, otherwise the selected music file restarts at every slide.
The sound or music file is linked to a presentation rather than embedded. If the presentation is going to be displayed on a different computer, remember to make sure that the music file is available on the computer where the presentation will be played. The link to the sound or music file must be established before starting the presentation.
Slide animations are similar to transitions, but they are applied to individual elements in a single slide, such as title, chart, shape, or individual bullet point. Animations can make a presentation more lively and memorable. However, as with transitions, heavy use of animations can be distracting and even annoying for an audience expecting a professional presentation.
Animations are best applied using Normal view in the Workspace so that individual objects on a single slide can easily be selected.
Figure 46: Animation deck in Sidebar
On a slide, an element, such as a graphic or an entire text box, has selection handles around it when selected. If a portion of the text in a text box is selected, any selection handles may not be visible. For more information on animation effects, see the Impress Guide.
1) Go to View > Normal on the Menu bar to open Normal view in the Workspace.
2) Select an element on a slide for animation.
3) On the Sidebar, select Animation to open the Animation deck (Figure 46).
4) Select an element in the Animation panel.
5) In the Effects panel, click on +Add to open the animation options.
a) In Category, select an animation category from the drop-down list.
b) In Effect, select an animation effect from the available options.
c) In Start, select how the animation starts from the drop-down list.
d) In Direction, select the direction of the animation from the drop-down list.
e) In Duration, enter a time in seconds for the animation duration.
f) In Delay, enter a time in seconds for to create a delay before the animation starts.
6) If required, select Automatic Preview to check the effect of the animation to a slide element.
7) Click Play to check how the animation effect when applied to a slide element.
1) Open the presentation and start the slide show using one of the following methods:
Use the keyboard shortcut F5 to start from the first slide, or Shift+F5 to start from the current slide.
Go to Slide Show > Start from First Slide, or Start from Current Slide on the Menu bar.
Click on Start from First Slide on the Slide Sorter toolbar.
2) If the slide transition is set to start after a time delay set in After on the Advance Slide panel, the transition runs after the time delay has elapsed and advances to the next slide.
3) If the slide transition is set to On mouse click on the Advance Slide panel, use one of the following options to for the transition to work and advance to the next slide:
Click the left mouse button.
Press the down arrow key
Press the right arrow key.
Press the page down key.
Press the space bar.
4) To navigate backwards through a slide show one slide at a time, use one of the following options:
Press the up arrow key.
Press the left arrow key.
Press the page up key.
5) To access more navigation options during a slide-show, right-click on a slide and use the options available in the context menu.
6) When the last slide has displayed, the message Click to exit presentation is displayed on screen. Press the Esc key, or click the left mouse button to exit the slide show.
7) To exit the slide show and return to the Impress workspace at any time, press the Esc key during the slide show.
Note
During the presentation, any animations on a slide are run in the specified order as the slide is displayed.
The Presenter Console provides extra control over slide shows when using dual displays, such as a laptop and a large display, or projector, for an audience. The view seen on a laptop display includes the current slide that can be seen by the audience, the next slide in the presentation, any slide notes, and a presentation timer.
Note
The Presenter Console only works with computers and operating systems that support two displays. When two displays are being used, one display can be a laptop.
The Presenter Console has to be enabled in Impress before use. Go to Tools > Options > LibreOffice Impress > General (macOS LibreOffice > Preferences > LibreOffice Impress > General) and select Enable Presenter Console in Presentation.
The Presenter Console provides the following views for making a presentation:
Default view — displays the current slide, including any effects and the next slide in the presentation (Figure 47). Click on the Previous and Next arrows to navigate through the presentation.
Figure 47: Presenter Console — Default view
Notes view — click on Notes to switch to display any notes that accompany each slide in the presentation (Figure 48). Click on Notes again to return to the default view.
Slides view — click on Slides to switch to display the slide thumbnails that are being used for the presentation (Figure 49). Click on Slides again to return to the default view.
Exchange — click on this icon to switch the Presenter Console between displays.
Figure 48: Presenter Console — Notes view
Figure 49: Presenter Console — Slides view
