LibreOfficeLogo

Writer Guide 7.3

Chapter 18,
Forms

Copyright

This document is Copyright © 2022 by the LibreOffice Documentation Team. Contributors are listed below. You may distribute it and/or modify it under the terms of either the GNU General Public License (https://www.gnu.org/licenses/gpl.html), version 3 or later, or the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), version 4.0 or later.

All trademarks within this guide belong to their legitimate owners.

Contributors

To this edition

Jean Hollis Weber

 

 

To previous editions

Jean Hollis Weber

Kees Kriek

Gillian Polack

Bruce Byfield

Barbara Duprey

Pulkit Krishna

Ron Faile Jr.

John A Smith

 

Feedback

Please direct any comments or suggestions about this document to the Documentation Team’s mailing list: documentation@global.libreoffice.org

Note

Everything you send to a mailing list, including your email address and any other personal information that is written in the message, is publicly archived and cannot be deleted.

Publication date and software version

Published March 2022. Based on LibreOffice 7.3.

Using LibreOffice on macOS

Some keystrokes and menu items are different on macOS from those used in Windows and Linux. The table below gives some common substitutions for the instructions in this document. For a detailed list, see the application Help.

Windows or Linux

macOS equivalent

Effect

Tools > Options
menu selection

LibreOffice > Preferences

Access setup options

Right-click

Control+click or right-click depending on computer setup

Open a context menu

Ctrl (Control)

(Command)

Used with other keys

Alt

⌥ (Option) or Alt, depending on keyboard

Used with other keys

F11

+T

Open Styles deck in Sidebar

Introduction

This chapter covers the use of interactive forms within Writer documents. A form has sections that are not to be edited, and other sections that are designed for the reader to make changes. For example, a questionnaire has an introduction and questions (which do not change) and spaces for the reader to type answers or select from supplied choices.

Writer provides several ways to enter information into a form, including check boxes, option buttons, text boxes, pull-down lists, and other items, collectively known as form controls.

LibreOffice forms include a lot of features; not everything is described in this chapter. Notable omissions are using forms in HTML documents and writing macros to link to form controls.

LibreOffice Calc, Impress, and Draw also support forms in much the same way that Writer does.

When to use forms

Forms are used in three ways:

Using forms to access a database offers a fast and easy way to build complex graphical front ends. Your form can include not only the fields that link to the data source, but also text, graphics, tables, drawings and other elements.

A typical way to use a simple form is:

1)  You design the form, then save it.

2)  You send the form to others (for example, by email).

3)  They fill in the form, save it, and send it back to you.

4)  You open the form and see what their answers are.

Tip

By using a data source, or setting a form to update over the web, you can gather data automatically. However, those methods are more complex and are not covered in this chapter.

Alternatives to using forms in Writer

LibreOffice Base provides an alternative way to access a data source. There are a lot of similarities between forms in Base and Writer, but one may be better for a particular task than the other. Base is appropriate only if the form accesses a data source; you would not use it for simple forms.

Creating a simple form

This section explains how to create a simple form without any links to a data source or database and without advanced customization.

Create a document

You do not need to do anything special when creating a document to use as a form, though it’s a good idea to make sure that the grid is enabled so that controls can be positioned accurately. Go to View > Grid and Helplines on the Menu bar and select Display Grid. You may also wish to select Snap to Grid.

Create a new Writer document with File > New > Text document.

Open the form toolbars

Two toolbars control form creation: Form Controls (Figure 2) and Form Design (Figure 3). Select View > Toolbars > Form Controls and View > Toolbars > Form Design on the Menu bar to show them both. You can also open the Form Design toolbar on the Form Controls toolbar.

The Form Controls toolbar has an icon for each of the most commonly used types of control. Some of these controls are also located on the Form menu (Figure 1).

You can dock these toolbars in different places on the Writer window, or leave them floating. When they are floating, you can also change them from vertical to horizontal and change the number of tools on a row; to make these changes, drag a corner of the toolbar.

See “Form controls referencebelow for descriptions of the tools on these toolbars.

Activate design mode

Click the Design Mode icon on the Form Controls toolbar to turn design mode on. (Click it again to turn it off.) This activates or deactivates the icons for inserting form controls and selects controls for editing.

When design mode is off, the form behaves as it would for the end user. Buttons can be pressed, check boxes selected, list items selected, and so on.

Insert form controls

1)  To insert a form control into the document, click the control’s icon to select it. The mouse pointer changes shape.

2)  Click in the document where you want the control to appear. (You can move it later.)

3)  Hold the left mouse button down and drag the control to size it. Some controls have a fixed size symbol followed by the name of the control (for example, Check Box or Option Button).

4)  The control icon remains active, so you can insert several controls of the same type without needing to go back to the toolbar.

5)  To change to another tool, click its icon on the toolbar.

6)  To stop inserting controls, click the Select icon on the Form Controls toolbar, or click any of the controls you have just inserted. The mouse pointer changes back to its normal appearance.

Tip

To make a form control square, hold down the Shift key when creating it. To keep the proportions of an existing control the same, hold down Shift when resizing it.

Configure controls

After inserting the controls, you need to configure them to look and behave as you want. Right-click a form control within the document and select Control in the context menu to open the Properties dialog for the selected control. Double-clicking on a form control also opens this dialog.

The Properties dialog has three tabs: General, Data, and Events. For simple forms, only the General tab is needed. See “Configure form controlsbelow, “Form control formatting optionsbelow, and the descriptions in the Help for more information. Configuration for use with a database is discussed in “Creating a form for data entrybelow.

The fields on this dialog vary with the type of control. To see additional fields, use the scroll bar or enlarge the dialog vertically.

Use the form

To use the form, leave design mode by clicking the Design Mode icon to deactivate it. Save the form document.

Form controls reference

The icons you see in Writer may differ from the ones shown here or they may be in a different order on the toolbar.

Form menu on Menu bar

Figure 1: Form menu on Menu bar

Image4

Form Controls toolbar

Figure 2: Form Controls toolbar

Image2

Table 1: Tools on Form Controls toolbar

Form Controls toolbar

 

1

Select

Selects a form control to perform some other action on it.

2

Design Mode

Toggles between design mode on (to edit forms) and design mode off (to use forms).

3

Toggle Form Control Wizards

Some form controls (List Box and Combo Box) have optional wizards. If you do not want the wizard to launch when you create one of these controls, use the Wizards On/Off icon to switch wizards off.

4

Form Design

Launches the Form Design toolbar, which can also be opened with View > Toolbars > Form Design.

5

Label

A text label. The difference between this and just typing on the page is that, as a control, you can link a label field to macros so, for example, something happens when the mouse passes over it or clicks on it.

6

Text Box

A control to create a box into which the form’s user can type any text.

7

Check Box

A box that can be selected or deselected on the form. You can label the box.

8

Option Button

Creates an option button (also known as a radio button). When multiple buttons are grouped together, only one can be selected at a time. The easiest way to group multiple buttons is to use the Group Box icon on the More Controls toolbar, with wizards enabled.

9

List Box

Creates a list of options as a pull-down menu that the user can choose from. If the form is linked to a data source and wizards are on, creating a list box launches the List Box Wizard.

If the form is not linked to a data source, turn wizards off and create an empty list box. Then in the List Entries field on the General tab, enter the options you want to appear on the list.

10

Combo Box

As with a List Box, you set up a list of choices. In addition, a panel at the top either displays the choice made or allows the form user to type in something else. This works the same as the List Box.

11

Push Button

Creates a button that can be linked to a macro. The label is the name that appears on the button.

12

Image Button

Behaves exactly like a push button, but displays as an image. Choose the image in the Graphics option on the General tab in the Control Properties dialog.

13

Formatted Field

A control allowing numeric formatting options. For example, you can set maximum and minimum values for the number entered, or the number type (decimal places, scientific, currency).

14

Date Field

Stores a date. You need to configure the earliest and latest dates the field will accept, the default date, and the date format. You can add a spinner.

15

Numerical Field

Displays a number. You need to specify formatting, maximum, minimum and default values. You can add a spinner.

16

Group Box

Group boxes have two different uses.

If wizards are on, creating a group box launches the Group Element wizard. This creates a group of options buttons (in which only one may be selected at a time). In most cases, using a group box is the best way to create a set of option buttons.

If wizards are off, a group box is simply a visual box to group together different controls. It has no effect on the way the controls operate.

17

Time Field

Works like a date field but specifies a time.

18

Currency Field

Works like a numeric field; additionally you can add a currency symbol.

19

Pattern Field

Useful when the form links into a data source. Specify an Edit Mask to restrict what a user can enter into the field. Specify a Literal Mask to restrict which data is displayed from the data source.

20

Table Control

Table controls are only useful with a data source. If no data source is specified, you will be prompted to choose one in the Table Element Wizard. You then pick the fields to display and, when design mode is off, the data appears in the table. The table also includes controls to step through the records.

Records can be added, deleted, and modified in the table.

21

Navigation Bar

A navigation bar is the same as the Form Navigation toolbar (View > Toolbars > Form Navigation), but can be placed anywhere in the document and be resized.

22

Image Control

Only useful when the form is connected to a data source and a field in the data source exists that can hold images. You can add new images to the database or retrieve and display images from it.

23

File Selection

Allows a user to select a file, either by typing the path and name directly or by clicking on a Browse button and choosing the file from a dialog.

24

Spin Button

Allows form users to choose a number by cycling through the list of numbers. You can specify maximum, minimum, default, and the step between numbers.

This control is not commonly used in Writer.

25

Scrollbar

Creates a scrollbar, with a number of options to define the exact appearance. This control is not commonly used in Writer.

Form Design toolbar

Figure 3: Form Design toolbar

Image3

Table 2: Tools on Form Design toolbar

Form Design toolbar

 

1

Anchor

Any form control can be anchored to page, paragraph, or character and also anchored as a character.

2

Align

Disabled unless the control is anchored as a character. You can align a control in different ways, for example so the top or bottom of the control lines up with the top or bottom of the text.

3

Bring to Front

Places the control on top of any other controls or text.

4

Forward One

Brings the control one level up in the stack.

5

Back One

Sends the control one level down in the object stack.

6

Send to Back

Sends the control to the bottom of the stack.

7

To Foreground

Moves the object in front of the text.

8

To Background

Moves the object behind the text.

9

Select

Selects a form control to perform some other action on it.

10

Design Mode

Toggles between design mode on (to edit forms) and design mode off (to use forms).

11

Control Properties

Launches form control properties dialog. This dialog can be kept open whiles different controls are selected.

12

Form Properties

Launches form properties dialog, which controls properties for the form as a whole, such as which data source it connects to.

13

Form Navigator

Displays all the forms and controls in the current document and allows you to edit and delete them easily.

If you use the Form Navigator, give your controls names (in the properties dialog) so you can tell which is which in the navigator.

14

Add Field

Useful only if you have specified a data source for the form. Otherwise, an empty box opens.

If you have specified a data source, Add Field opens a list of all the fields in the specified table, which you can then drag and drop onto the page. The fields are placed on the page with the name of the field before them.

15

Activation Order

Allows you to specify the order in which focus shifts between controls. You can test the order by leaving design mode and using Tab to switch between the controls.

16

Open in Design Mode

Opens the current form in design mode (to edit the form rather than entering data into it).

17

Automatic Control Focus

If activated, focus is set to the first form control.

18

Position and Size

Opens the Position and Size dialog, where you can type precise values, rather than dragging the control. You can also lock the size or position so they do not get changed accidentally. For some controls, you can rotate and set the slant and corner radius.

19

Display Grid

Displays a grid of dots on the page, to help you line up controls.

20

Snap to Grid

When a control is brought close to a grid point or line, it will snap to the grid. This makes it is easier to line up controls.

21

Guides when Moving

When a control is being moved, lines extend from the control horizontally and vertically to help you position it accurately.

Example: a simple form

In this example, we will create the form shown in Figure 4. If you follow the given steps, your form will look similar to this one.

Figure 4: Completed form

Image18

Create the document

Open a new document (File > New > Text Document) and type any text to be included (see Figure 5 for an example). It is a good idea to sketch the final result to use as a guide when designing the form, although it can easily be changed later.

Figure 5: Initial document without form controls

Image5

Add form controls

The next step is to add the form controls to the document. We will have four controls:

To add these controls:

1)  Select View > Toolbars > Form Controls to open the Form Control toolbar.

2)  If the tools are not active, click the Design Mode icon to activate them.

3)  Click the Text Box icon, then click in the document and drag the shape of the Name text box to approximately the size you want. Drag it to line up with the Name: label.

4)  Make sure Toggle Form Control Wizards is OFF. Click the Option Button icon. Click and drag to create three option buttons near the Gender: label in the document. We will configure these in the next section.

5)  Click the List Box icon and draw a list box by Favourite shape: in the document. This will just be an empty pane for now.

6)  Click the Check Box icon and create four check boxes by All shapes you like, side by side across the page.

Your document should now look something like Figure 6. Do not worry if the controls are not lined up well; we will fix this later.

Figure 6: Document with form controls

Image7

Configure form controls

Text box

No further configuration is required for the Name field, but you may wish to change the height or width of the field, its background color, or other formatting. If so:

1)  Be sure Design Mode is on and Wizards are off.

2)  Double-click on the Name field to open the Properties: Text Box dialog (Figure 7).

3)  On the General tab, scroll down (or expand the dialog by dragging the bottom edge down) to find the Width and Height properties. Change these as needed.

4)  You can then close the dialog or leave it open while you configure the other controls.

Figure 7: Changing the width and height of a text box

Image8

Option buttons

The Gender option buttons need to be configured to allow only one of the three to be selected. You can do this in two ways: using individual option buttons as described here, or using a Group Box (see page below).

1)  Be sure Design Mode is ON and Wizards are OFF.

2)  If the Properties dialog is open, click once on the first option button to change the dialog to Properties: Option Button. If the dialog is not open, double-click the first option button. In the Properties dialog (Figure 8), on the General tab, type Male in the Label field and Gender in the Group name field.

3)  Repeat for the other two options, using Female and Other, respectively, for the Label and Gender for the Group name. (Grouping allows only one option to be selected at a time.)

Figure 8: Specifying label and group names for an option button

Image6

If the option buttons are too far apart, click on each in turn and drag it to the left or right.

If the option buttons are not lined up neatly, do this:

1)  Click the Select button on the Form Controls toolbar and draw a box around the three option button controls with the mouse to select all of them (Figure 9).

2)  Right-click and choose Align > Top in the context menu. Figure 10 shows the result.

Figure 9: Select controls and align to top

Image12

Figure 10: Result of action to align controls

Image11

List box

To add the list of choices to the list box, do this:

1)  Be sure Design Mode is ON and Wizards are OFF. Double-click the List Box control to open the control’s Properties dialog (Figure 12). Select the General tab.

2)  Scroll down to find the List Entries text input box. Type the names of the shapes (Circle, Triangle, Square, Pentagon) one at a time. After each, press Shift+Enter, as shown in Figure 11.

Figure 11: Entering the terms for a list

Image9

  1. When you click away from the List entries box in the dialog, you should see a line saying "Circle";"Triangle";"Square";"Pentagon" (Figure 12).

Figure 12: Properties dialog for a list box

Image10

Check boxes

To give the check boxes names:

1)  Be sure Design Mode is ON and Wizards are OFF. Double-click the first Check Box control.

2)  In the Properties: Check Box dialog (Figure 13), change the text in the Label field to Circle and press Enter. The cursor moves to the next line, and the label on the check box in the document changes immediately.

Figure 13: Top part of Properties dialog for a check box

Image1

3)  Click each of the other three check boxes in turn. Change the text in the Label text input box in the Properties dialog to Triangle, Square, and Pentagon in turn.

4)  Close the Properties dialog.

5)  Turn Design Mode off.

You have now completed the form, which should look something like Figure 4 above.

Group box

As an alternative to creating individual option buttons for Gender (described above), you can use a Group Box to insert a group of option buttons. Group boxes stack the selections one under the other (as shown in Figure 17 below); individual buttons can be moved into any arrangement you prefer (we arranged them horizontally above).

To use a Group Box instead of individual Option Buttons:

1)  Be sure both Design Mode and Wizards are ON. Click the Group Box icon and draw a box next to the Gender: label. The Group Element Wizard (Figure 14) opens automatically.

2)  Type Male in the box on the left. Click the >> button to move it to the Option fields box on the right.

3)  Repeat for Female and Other. The Wizard should now look like Figure 15. Click Next >.

4)  On the next page of the Wizard (Figure 16), choose No, one particular field is not going to be selected as a default. Click Next >.

5)  On the next page, make no changes. Click Next >.

6)  On the next page, delete the words “Group Box” from the caption area. If we did not have a Gender: label already in the form, you might want to type Gender as the caption.

7)  Click Finish. The survey form should look like Figure 17.

Figure 14: Inserting a Group Box using the Group Element Wizard

Image14

Figure 15: Wizard after adding names for the option fields

Image15

Figure 16: Choosing to not have a default option

Image16

Figure 17: Final group box in survey form

Image17

Finishing touches

The form is complete, but you are free to make further changes to the document. If you plan to send this out to other people to complete, you probably want to make the document read-only so that users would be able to fill in the form but not make any other changes to the document.

To make the document read-only, select File > Properties, select the Security tab and enable Open file read-only.

Note

If the document is read-only, anyone filling in the form will need to use File > Save as to save the document.

Accessing data sources

The most common use for a form is to input information into a database. For example, you can design a form that others can use to enter information into a contacts database. Because it is part of a Writer document, the form can contain graphics, formatting, tables, and other elements to make it look just the way you want. Modifying the form is as simple as editing a document.

LibreOffice can access numerous data sources. These include ODBC, MySQL, Oracle JDBC, spreadsheets and text files. As a general rule, databases can be accessed for reading and writing; other data sources (such as spreadsheets) are read-only.

Tip

To see the list of supported data source types for your operating system, choose File > New > Database. On the first page of the Database Wizard, select Connect to an existing database and then open the drop-down list.

For the purpose of this chapter, we assume you have previously created a database or other data source and registered it for use with Writer. Chapter 14, Mail Merge, describes how to create and register a database.

Creating a form for data entry

Once a database is registered with LibreOffice, follow these steps to link a form to the data source:

1)  Create a new document in Writer (File > New > Text Document).

2)  Design your form, without putting in the actual fields (you can always change it later).

3)  Show the Form Controls and Form Design toolbars.

4)  Click the Design Mode icon to put the document into design mode.

5)  Click the Text Box icon. Click in the document and drag to create a text box for the first form field.

6)  Additional fields, of any type, can be added in the same way (click and drag).

So far you have followed the same steps used before when creating your first form. To link the form with the data source you registered:

1)  Click the Form Properties icon in the Form Design toolbar, or right-click any of the fields you inserted and select Form Properties, to open the Form Properties dialog (Figure 18).

Figure 18: Form properties, connecting to a data source

Image22

2)  In the Form Properties dialog, choose the Data tab.

3)  For each form control in turn, click the control to select it (small green boxes appear around it), then launch the Properties dialog: either right-click and select Control Properties or click the Control Properties icon on the Form Controls toolbar.

4)  In the Properties dialog, click the Data tab (Figure 19). If you set up the form correctly, the Data Field option will contain a list of the different fields in the data source (for example, Name, Address and Telephone). Select the field you want.

Figure 19: Form control properties, Data tab

Image21

5)  Repeat for each control in turn until every control that should be assigned to a field has been assigned.

Caution

If you created a database in LibreOffice Base and your Primary Key field had AutoValue set to Yes, that field does not need to be part of the form. If AutoValue was set to No, you will have to include it and users will need to enter a unique value into that field whenever they make a new entry—not something that is recommended.

Entering data into a form

Once you have created a form and tied it to a database, use it to enter data into the database or modify data already there:

1)  Make sure that the form is not in design mode. (On the Form Controls toolbar, click the Design Mode icon. When design mode is off, most of the buttons on the toolbar will be grayed out.)

2)  Make sure that the Form Navigation toolbar is on (View > Toolbars > Form Navigation). This toolbar normally appears at the bottom of the workspace.

Figure 20: Form Navigation toolbar

graphics52

3)  If there is existing data in the data source, use the control buttons on the Form Navigation toolbar to look at different records. To amend data in a record, edit the values in the form. To submit the changes, press Enter with the cursor in the last field. The record is saved and the next record is displayed.

4)  If there is no data in the form, enter information by typing into the fields of the form. To submit the new record, press Enter with the cursor in the last field.

5)  Other functions can be performed from the Form Navigation toolbar, including deleting a record and adding a new record.

Note

If a user tries to fill in the form and receives the error “Attempt to insert null into a non-nullable column”, then the form designer should go back to the database and confirm that the Primary Key field has the Auto Value set to Yes. This error will prevent the form user from saving the records.

Advanced form customization

Linking a macro to a form control

You can set any form control (for example, text box or button) to perform an action when triggered by some event.

To assign a macro to an event:

1)  Create the macro. See Chapter 13, Getting Started with Macros, in the Getting Started Guide.

2)  Be sure the form is in design mode. Right-click the form control, select Control Properties in the context menu, and click the Events tab (Figure 21).

Figure 21: Control properties, Events tab

Image19

3)  Click the browse icon by any event to open the Assign Action dialog (Figure 22).

4)  Click the Macro button and select the macro from the list in the Macro Selector dialog (not shown). You return to the Assign action dialog. Repeat as needed, then click OK to close the dialog.

Macros can also be assigned to events relating to the form as a whole. To do this, right-click a form control in the document, select Form Properties, and click the Events tab.

Figure 22: Assign action dialog

Image20

Read-only documents

Having created your form, you want whoever is using it to be able to access the information stored in the database, or complete the form, without changing the layout. To do this, make the document read-only by choosing File > Properties > Security and selecting Open file read-only.

Fine-tuning database access permissions

By default, when a database is accessed from a form, any changes can be made to it: records can be added, deleted, and amended. You may not want that behavior. For example, you may want users to be able only to add new records or to be prohibited from deleting existing records.

In design mode, right-click a form control and select Form Properties in the context menu. On the Data tab of the Form Properties dialog are a number of options: Allow additions, Allow deletions, Allow modifications and Add data only. Set each of these to Yes or No to control the access users have to the data source.

Individual fields can also be protected. This might be useful if you wanted a user to be able to modify some parts of a record but only view others, such as a stock list where item descriptions are fixed and quantities can be modified.

To make an individual field read-only, in design mode, right-click the form control within the document and select Control from the context menu. Select the General tab (Figure 23) and set Read-only to Yes.

Figure 23: Data Properties of a form

Image13

Form control formatting options

You can customize the way form controls look and behave in a number of ways. These are all accessed in design mode. Right-click the form control, select Control Properties in the context menu and select the General tab in the Properties dialog.

Contents