LibreOfficeLogo

Writer Guide 7.5

Chapter 20,
Customizing Writer

Copyright

This document is Copyright © 2023 by the LibreOffice Documentation Team. Contributors are listed below. You may distribute it and/or modify it under the terms of either the GNU General Public License (https://www.gnu.org/licenses/gpl.html), version 3 or later, or the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), version 4.0 or later.

All trademarks within this guide belong to their legitimate owners.

Contributors

To this edition

Jean Hollis Weber

Kees Kriek

 

To previous editions

Jean Hollis Weber

Bruce Byfield

Gillian Polack

Cathy Crumbley

John A Smith

Ron Faile Jr.

John M. Długosz

Barbara Duprey

Rafael Atias

Kees Kriek

 

 

Feedback

Please direct any comments or suggestions about this document to the Documentation Team’s forum at https://community.documentfoundation.org/c/documentation/loguides/ (registration is required) or send an email to: loguides@community.documentfoundation.org. Emails sent to the forum are moderated.

Note

Everything you send to a forum, including your email address and any other personal information that is written in the message, is publicly archived and cannot be deleted.

Publication date and software version

Published February 2023. Based on LibreOffice 7.5.

Using LibreOffice on macOS

Some keystrokes and menu items are different on macOS from those used in Windows and Linux. The table below gives some common substitutions for the instructions in this document. For a detailed list, see the application Help.

Windows or Linux

macOS equivalent

Effect

Tools > Options
menu selection

LibreOffice > Preferences

Access setup options

Right-click

Control+click or right-click depending on computer setup

Open a context menu

Ctrl (Control)

(Command)

Used with other keys

Alt

⌥ (Option) or Alt, depending on keyboard

Used with other keys

F11

+T

Open Styles deck in Sidebar

Introduction

This chapter briefly describes some of the setup options found under Tools > Options on the Menu bar in Writer. Additional options, and more details about the ones given here, are covered in the Help and in the Getting Started Guide. Several of the most relevant options are discussed in other chapters of this book, in the context of tasks where they are most applicable.

This chapter also briefly describes some common customizations that you may wish to do. You can customize menus, toolbars, and keyboard shortcuts, add new menus and toolbars, and assign macros to events. Other customizations are made easy by extensions that you can install from the LibreOffice website or from other providers. You may also choose to activate and use some experimental features; see below.

Tip

Many options are intended for power users and programmers. If you don’t understand what an option does, it’s usually best to leave it on the default setting unless instructions in this book recommend changing the setting.

Note

Customizations to menus and toolbars can be saved in a template. To do so, first save them in a document and then save the document as a template as described in Chapter 10, Working with Templates. If you work on more than one project, you may find that having different menus and toolbars can be useful.

Choosing options for all of LibreOffice

This section covers some of the settings that apply to all the components of LibreOffice (Writer, Calc, Impress, Draw, Math, and Base) and that are particularly important when using Writer.

To navigate to options that apply to all LibreOffice components, click Tools > Options (LibreOffice > Preferences on macOS) and then click the marker (+ or triangle) by LibreOffice on the left-hand side. A list of pages drops down. Select an item in the list to display the relevant page on the right-hand side of the dialog.

Tip

The Reset button (located in the lower part of any page of the Options dialog) resets the values on that page to the values that were in place when you opened the dialog. It may be called Revert on some installations.

If you are using a version of LibreOffice other than US English, some field labels may be different from those shown in the illustrations.

User data

Because Writer can use the name or initials stored in the LibreOffice – User Data page for several things, including document properties (‘created by’ and ‘last edited by’ information), the name of the author of comments and changes, and the sender address in mailing lists, you will want to ensure that the correct information appears here.

Fill in the form, or amend or delete any existing information. If you do not want user data to be part of the document’s properties, deselect Use data for document properties.

In the Cryptography section, you can set the preferred public key for OpenPGP encryption and digital signature. These preferred keys will be pre-selected in the key selection dialog when you sign or encrypt a document (see Chapter 7, Printing, Exporting, Emailing, Signing).

View options

The options on the LibreOffice – View page affect how the document window looks and behaves. Set them to suit your personal preferences. For details, see the Help or the Getting Started Guide.

Print options

On the LibreOffice – Print page, set the print options to suit your default printer and your most common printing method.

In the Warnings section on the right side of the page, you can choose whether to be warned if the paper size or orientation specified in your document does not match the paper size or orientation available for your printer. Having these warnings turned on can be quite helpful, particularly if you work with documents produced by people in other countries where the standard paper size is different from yours.

Figure 1: Choosing general printing options for all components

Image2

Tip

If your printouts are incorrectly placed on the page or chopped off at the top, bottom, or sides, or the printer is refusing to print, a likely cause is page size incompatibility.

Paths options

On the LibreOffice – Paths page, you can change the location of files associated with, or used by, LibreOffice to suit your needs. For example, you might want to store documents by default somewhere other than My Documents, or you might want to store project templates in folders not in the supplied template paths. Multiple paths are possible, so you can add locations. For more information, see the Getting Started Guide,

Fonts options

If you receive a document containing fonts that you do not have on your system, LibreOffice will substitute fonts for those it does not find. You might prefer to specify different fonts from the ones that the program chooses. On the LibreOffice – Fonts page, you can specify replacement fonts.

Tip

Liberation fonts (Serif, Sans, and Mono) are often good choices to substitute for Times, Arial, and Courier.

Note

The choices made here do not affect the default fonts in your documents. To do that, see “Basic Fonts optionsbelow. To change more than the basic fonts, you need to create a new default template for Writer documents; see Chapter 10, Working with Templates.

Security options

Use the LibreOffice – Security page to choose security options for saving documents and for opening documents that contain macros. For information on the options not mentioned here, refer to the Help or the Getting Started Guide.

Security Options and Warnings

If you record changes, save multiple versions, or include hidden information or notes in your documents, and you do not want some recipients to see that information, you can set warnings to remind you to remove it, or you can have LibreOffice remove some of it automatically. Note that unless the information is removed, much of it is retained even when the file has been saved to other formats, including PDF.

Click the Options button to open a separate dialog with several options, including:

Remove personal information on saving

Select this option to always remove user data from the file properties when saving the file. To save personal information with documents and still be able to manually remove personal information only from specific documents, do not select this option.

Ctrl-click required to open hyperlinks

The default behavior in LibreOffice is that using Ctrl+click a hyperlink opens the linked document or website. This is because many people find writing and editing documents easier when accidental clicks on links do not activate the links. To set LibreOffice to activate hyperlinks using just an ordinary click, do not select this option.

Application colors

Writing, editing, and (especially) page layout are often easier when you can see the page margins (text boundaries), the boundaries of tables and sections, grid lines, and other features. In addition, you might prefer to use colors that are different from LibreOffice’s defaults.

On the LibreOffice – Application colors page (Figure 2), you can specify which user interface elements are visible and the colors used to display them.

Note

To change the color settings used in Track Changes mode, go to Tools > Options > LibreOffice Writer > Changes.

Figure 2: Showing or hiding text, object, and table boundaries

Image23

Choosing options for loading and saving documents

You can set the options for loading and saving documents to suit the way you work.

If the Options dialog is not already open, click Tools > Options. Click the expansion symbol (+ or triangle) to the left of Load/Save.

General

Most of the choices on the Load/Save – General page (Figure 3) are familiar to users of other office suites. Some items of interest are described below.

Load user-specific settings with the document

When a LibreOffice document is saved, certain settings from the user's system are saved with it. When the document is opened on another user’s system, it will use the settings saved from the previous user’s system. Deselecting this option causes the current user’s settings to override the settings previously saved with the document.

Even if you deselect this option, some settings are always loaded with the document:

Figure 3: Choosing Load and Save options

Image9

Load printer settings with the document

If this option is enabled, the printer settings of the previous user will be loaded with the document. In an office setting, this may cause a document to be printed on a distant network printer unless the printer is manually changed in the Print dialog. If disabled, the current user’s default printer will be used to print the document. The current printer settings will be stored with the document whether or not this option is selected.

Save AutoRecovery information every __ minutes

Choose whether to enable AutoRecovery and how often to save the information used by the AutoRecovery process. AutoRecovery in LibreOffice saves the information needed to restore all open documents in case of a crash. If you have this option set, recovering your document after a system crash will be easier.

Edit document properties before saving

If this option is selected, the document’s Properties dialog pops up to prompt you to enter relevant information the first time you save a new document (or whenever you use Save As).

Always create backup copy

Saves the previously saved version of a document as a backup copy in a separate folder whenever you save a document. When LibreOffice creates a new backup copy, the previous backup copy is replaced. The backup copy gets the extension .bak. To see or change the backup folder, go to Tools > Options > LibreOffice > Paths. When opening a backup file, you will be prompted to specify the program to open it with; choose LibreOffice.

Tip

Authors whose work may be very lengthy should always consider enabling LibreOffice to create an automatic backup copy.

Save URLs relative to file system / to internet

Use these options to select the default for relative addressing of URLs in the file system and on the Internet. For details, see the Getting Started Guide.

Default File Format and ODF Settings

ODF format version: LibreOffice by default saves documents in OpenDocument Format (ODF) version 1.3 Extended. While this allows for improved functionality, there may be backwards compatibility issues. When a file saved in ODF 1.3 Extended is opened in an editor that uses an earlier version of ODF, some of the advanced features may be lost. If you plan to share documents with people who use editors that use older versions of ODF, you may wish to save the document using ODF 1.2 Extended (compatibility mode).

Document type: If you routinely share documents with users of Microsoft Word, you might want to change the Always save as option to one of the Word formats. However, you can choose a Word format when you save any individual file.

VBA Properties

On the VBA Properties page, you can choose whether to keep any macros in Microsoft Office documents that are opened in LibreOffice. For details, see the Getting Started Guide.

Microsoft Office

On the Load/Save – Microsoft Office page, you can choose what to do when importing and exporting Microsoft Office OLE objects (linked or embedded objects or documents such as equations or spreadsheets): convert them into or from the corresponding LibreOffice OLE object or load and save them in their original format. For details, see the Getting Started Guide.

HTML compatibility

Choices made on the Load/Save – HTML Compatibility page affect HTML pages imported into LibreOffice and those exported from LibreOffice. For more information, see the Help and the Getting Started Guide.

Choosing Writer-specific options

Settings chosen in the LibreOffice Writer section of the Options dialog determine how Writer documents look and behave while you are working on them.

If the Options dialog is not already open, choose Tools > Options. Click the marker (+ or triangle) by LibreOffice Writer on the left side of the dialog.

General options

The choices on the LibreOffice Writer – General page (Figure 4) affect the updating of links and fields, the units used for rulers and other measurements, and the default tab stop positions.

Automatically Update [Fields and Charts]

You may not want fields or charts to update automatically while you are working, because that slows down performance. Alternatively, you may want automatic updates if you are referring to information in the fields or charts.

Update Links when Loading

Depending on your work patterns, you may not want links to be updated when you load a document. For example, if your file links to other files on a network, you won’t want those links to try to update when you are not connected to the network.

Figure 4: Choosing general options for Writer

Image3

Settings

Measurement unit

Document designers recommend using points as the default measurement because you can easily relate things like font size to things like indents and tabs.

Tab stops

The Tab stops setting specifies the distance the cursor travels for each press of the Tab key. This setting is also used for the indent distance applied by the Increase Indent and Decrease Indent buttons on the Formatting Toolbar, which affect the indentation of entire paragraphs.

Tip

To avoid unwanted changes, do not rely on default tab settings. Rather, define your own tabs in paragraph styles or individual paragraphs (see Chapter 4, Formatting Text).

Word Count

Additional separators

For counting words, specifies the characters that are considered to separate words, in addition to spaces, tabs, line breaks, and paragraph breaks.

Show standardized page count

Editors and publishers often define a “standard” page as containing a specified number of characters or words; this field allows quick calculation of the number of these pages.

View options

Two pages of options set the defaults for viewing Writer documents: View (described here) and Formatting Aids (described below). View is a good page to check if, for example, you cannot see graphics on the screen.

Figure 5: Choosing default View options for Writer

Image6

Guides – Helplines While Moving

Helplines assist with precisely position a frame or drawing object on a page. When enabled, horizontal and vertical lines appear that are the height and width of a selected object. These lines extend across the complete working area as the object is moved.

Display Fields

Hidden text

Display text that is hidden by Conditional Text or Hidden Text fields.

Hidden paragraphs

Display paragraphs that contain a Hidden Paragraph field. This option has the same function as the menu command View > Field Hidden Paragraphs.

Display tracked changes

Tracked deletions in margin

By default, deletions are shown in the text with a strikethrough font. To show deletions in the margin, not in the text, select this option.

Tooltips on tracked changes

When this option is selected, hold the mouse pointer over a tracked change to show the type of change, the author, date, and time of day for the change. To hide these tooltips, deselect this option.

Outline Folding

Show outline-folding buttons

When this option is selected, a button with an arrow is visible near any selected heading in your document. Click on it to “fold” (hide) all text from the current heading to the next heading.

Include sub levels

If this option is also selected, clicking on a heading folds all text from that heading to the next same-level heading with all its subheadings.

The other options should be self-explanatory. If not, please refer to the Help.

Formatting Aids options

On the LibreOffice Writer – Formatting Aids page (Figure 6), select the desired options.

Figure 6: Choosing default Formatting Aids options

Image8

Layout Assistance – Math baseline alignment

To set the default vertical alignment for formula (Math) objects to use the text base line as a reference, select this option. To enable changing the vertical positioning of objects, deselect this option; you can then set the position for individual objects. See the Math Guide for more information.

Display Formatting

The Display Formatting options determine which symbols show when you select View > Formatting Marks on the Menu bar or the Formatting Marks icon on the Standard toolbar. Symbols such as paragraph ends and tabs can help in writing, editing, and page layout. For example, they can show if there are any blank paragraphs or if any tables or graphics are too wide and intrude into the margins of the page.

Protected Areas – Enable cursor

When this option is selected, you can set the cursor in a protected area, but you cannot make any changes. To make changes, you first need to unprotect the area. The methods of protecting and unprotecting vary with the area.

Direct Cursor

Direct Cursor lets you enter text, images, tables, frames, and other objects in any blank area in your document. Writer then inserts your choice of tabs, spaces, indents, and so on to position the text or objects. For details on these choices, please see the Help.

Note

The direct cursor feature can lead to many formatting oddities and is incompatible with rigorous use of styles.

Image – Anchor

You can choose the default anchor for newly added images: To Paragraph, To Character, or As Character. For more about anchoring images, see Chapter 11, Images and Graphics.

Grid options

Snap to grid automatically moves an object to the nearest gridlines. This can be very helpful when you are trying to align several objects such as graphics or tables.

On the LibreOffice Writer – Grid page (Figure 7), you can choose whether to enable this feature and what grid intervals to use. If the grid intervals (subdivisions) are too large, you may find that you do not have enough control in placing the objects.

Figure 7: Choosing Grid options for Writer

Image21

Basic Fonts options

On the LibreOffice Writer – Basic Fonts (Western) page (Figure 8), you can choose the fonts and font sizes for the Default Paragraph Style, headings, lists, captions, and indexes. These values are applied to new documents unless different settings are selected in the document itself or defined in the document’s template.

To reset the values to the defaults when LibreOffice was installed, click the Default button.

If Asian and/or CTL have been activated in Languages, extra pages are provided for their font options.

Figure 8: Choosing basic (default) fonts

Image31

Print options

On the LibreOffice Writer – Print page, you can choose which items are printed with a Writer document by default. These options are in addition to the general options for all LibreOffice components on the LibreOffice – Print page (see page above).

Some considerations:

Tip

You can override any of these defaults when printing a specific document. Click File > Print, then use the options on the various pages of the Print dialog.

Figure 9: Choosing default Print options for Writer

Image11

Table options

On the LibreOffice Writer – Table page (Figure 10), you can specify the default behavior of tables. See the Help or Chapter 13, Tables, for more information.

Some considerations:

Figure 10: Choosing default Table options

Image12

Changes options

If you plan to use the change-tracking feature of Writer (described in Chapter 3, Working with Text: Advanced), use the LibreOffice Writer – Changes page (Figure 11) to choose the way changes to text and formatting are marked. Change bars can show where a change has been made to a line of text and are formatted under Lines Changed.

Figure 11: Choosing options for tracking changes

Image14

Comparison options

The options on the LibreOffice Writer – Comparison page determine the level of detail used by the Compare Document feature (Edit > Track Changes > Compare Document), described in Chapter 3, Working with Text: Advanced.

You can choose whether to compare word-by-word, character-by-character, or using an algorithm (Auto, which is the default). If you choose By word or By character, the random number choices are activated and you can optionally specify the minimum number of characters to be compared (Ignore pieces of length __).

Figure 12: Choosing options for comparing documents

Image16

Compatibility options

The settings on the LibreOffice Writer – Compatibility page (Figure 13) are used mainly when importing documents from Microsoft Word. If you are not sure about the effects of these settings, leave them as the defaults provided by LibreOffice. For information about settings that are not described below, see the Help. All settings selected will apply only to the current document, unless you select the Use as Default button at the bottom (not shown in the figure).

Figure 13: Choosing compatibility options

Image5

Add spacing between paragraphs and tables

Paragraph spacing is treated differently in LibreOffice Writer than it is in Microsoft Word. If you have defined spacing between paragraphs or tables in LibreOffice, this spacing is added to the spacing defined in Microsoft Word. This only affects the current document.

If this option is selected, Microsoft Word-compatible spacing is added between paragraphs and tables in LibreOffice Writer documents.

Add paragraph and table spacing at tops of pages

You can define paragraphs and tables to have space appear before (above) them. If this option is selected, any space above a paragraph will also appear if the paragraph is at the beginning of a page or column, or if the paragraph is positioned on the first page of the document, or after a manual page break. This only affects the current document.

If you import a Microsoft Word document, the spaces are automatically added during the conversion.

Add paragraph and table spacing at bottom of table cells

Specifies that the bottom spacing is added to a paragraph, even when it is the last paragraph in a table cell.

AutoCaption options

LibreOffice can automatically insert captions for tables, pictures, frames, and OLE objects in a Writer document. To set this up, use the options on the LibreOffice Writer > AutoCaption page. Select the object you want to be automatically captioned (LibreOffice Writer Table in Figure 14). With the item highlighted, specify the characteristics of the caption.

Figure 14: Setting up automatic captions

Image4

The categories supplied for captions are Drawing, Illustration, Table, and Text. To use another name (for example, Figure) for the caption label, type the required term in the Category box.

Note

You may not want captions for every table, for example if you use tables for layout as well as for tables of data. You can always add captions to individual tables, graphics, or other objects (right-click > Insert Caption).

Information about numbering captions by chapter, character styles, frame styles, and other items on the AutoCaption page is given in other chapters in this book.

Mail Merge Email options

Using a data source such as an address book, Writer can insert personal, address, and other information into form letters. These documents can be printed for mailing or they can be emailed through Writer. See Chapter 14, Mail Merge, for details.

Use the LibreOffice Writer – Mail Merge Email page to set up the user and server information for sending form letters by email. If you are not sure what information to put in any of the fields, consult your email program or your internet service provider.

Figure 15: Specifying settings for use when emailing mail-merged form letters

Image13

Choosing language settings

You may need to do several things to get the language settings you want:

Install the required dictionaries

LibreOffice automatically installs many language modules with the program. A language module can contain up to three submodules: spelling dictionary, hyphenation dictionary, and thesaurus. These are usually referred to as “dictionaries” in Writer.

To add other dictionaries, be sure you are connected to the Internet, and then choose Tools > Language > More Dictionaries Online on the Menu bar. LibreOffice will open your default web browser to a page containing links to additional dictionaries that you can install. Follow the prompts to select and install the ones you want.

Change some locale and language settings

You can change some details of the locale and language settings that LibreOffice uses for all documents or for specific documents. See the Help for details on all these options.

In the Options dialog, click the expansion symbol (+ sign or triangle) by Language Settings and choose Languages.

On the right-hand side of the Language Settings – Languages page (Figure 16), change the settings as required. For more information about the fields on this page, see the Getting Started Guide.

Figure 16: Choosing language options

Image30

In the example, English (USA) has been chosen for all the appropriate settings, but you could choose a mixture of languages. For example, if you were working in Germany, you might prefer the user interface to be in English (USA), but German (Germany) for the Locale setting, which influences settings for numbering, currency, and units of measure.

If you want the language setting to apply to the current document only, instead of being the default for all new documents, select For the current document only.

Changes to the system input language normally affect text typed into a document after the change. If you do not want this to happen, select Ignore system input language; new text will then continue to follow the language of the document or the paragraph, not the system language.

If necessary, select the options to enable support for Asian languages (Chinese, Japanese, Korean) and support for CTL (complex text layout) languages such as Hindi, Thai, Hebrew, and Arabic. If you choose either of these options, the next time you open the Options dialog, you will see some extra pages under Language Settings. These pages are not discussed here.

Choose spelling and grammar options

To change the options for checking spelling and grammar, use the Language Settings > Writing Aids page (Figure 17).

Figure 17: Choosing languages, dictionaries, and options for checking spelling

Image1

Some considerations:

Here you can also select which of the user-defined (custom) dictionaries are active, add a new custom dictionary, edit dictionaries, and delete custom dictionaries. Dictionaries installed by the system cannot be deleted. For details on using the Available Language Modules and User-defined Dictionaries sections, please see the Help.

Tip

When checking spelling, words marked “Add to Dictionary” are added by default to the standard dictionary. Words marked “Ignore All” are added to the List of Ignored Words dictionary. See Chapter 2, Working with Text: Basics.

Defining and using custom dictionaries

You can add a variety of custom (user-defined) dictionaries, including a dictionary of exceptions (words to be avoided, which will be marked as incorrect) or dictionaries of project-specific terms (words that will not be marked as incorrect). You can then select which, if any, of these custom dictionaries to use (in addition to a standard dictionary) when setting up a document.

For more information, see Writing Aids in the Help.

Sentence checking

LibreOffice can check sentences in many languages. These checkers are enabled by default if the language is the computer’s default language, and others can be added using the Extension Manager (see page below). The set of rules available for the sentence checkers depends on the language.

On the Language Settings > English Sentence Checking page, you can choose which items are checked for, reported to you, or converted automatically. This menu is also found in the English dictionaries extension installed by default by LibreOffice (select Tools > Extension Manager, select English spelling dictionaries and click the Options button to reveal the menu). Select which of the optional features you wish to check. These are described in Chapter 2, Working with Text: Basics.

After selecting the additional grammar checks, you must restart LibreOffice, or reload the document, for them to take effect.

Activating Language Tool

Language Tool is a multilingual grammar, style, and spelling checker provided by https://languagetool.org/. Its use is not described in this guide; please see the website for details.

If you have an API key for LanguageTool, you can activate the tool by selecting Enable LanguageTool in Language Settings > LanguageTool Server Settings, then supply the requested information (Base URL, Username, and API Key).

Customizing menus

You can add to and rearrange menus on the Menu bar, add commands to menus, and make other changes. You can also modify context (right-click) menus in a similar way.

To customize a menu, choose Tools > Customize. On the Customize dialog, go to the Menus tab (Figure 18) or the Context Menus tab.

Figure 18: The Menus tab of the Customize dialog

Image7

Modifying an existing menu

1)  In the Scope drop-down list in the upper right of the Customize dialog, choose whether to apply the customized menu to all of LibreOffice Writer or only to a specific document.

2)  In the Target drop-down list, select the menu that you want to customize. The list includes the main menus and submenus. The commands on the selected menu are shown in the Assigned Commands list.

3)  To add a command to the selected menu, click on a command in the Available Commands list and then click the large right arrow. You can narrow the search by using the Search box on the top left or selecting the Category in the drop-down list. Use the up and down arrows on the right-hand side to move the command into the position where you want it in the list.

4)  To remove a command from the selected menu, click on it in the Assigned Commands list and then click the large left arrow.

5)  To insert a separator or submenu, select the item directly before where you want the inserted item to appear, and use the commands in the Insert drop-down.

Figure 19: Insert drop-down

Image19

6)  To rename a menu item, select it in the Assigned Commands list and choose Rename in the Modify drop-down.

Figure 20: Modify drop-down

Image20

7)  When you have finished making all your changes, click OK to save them.

Creating a new menu

You might find a “Favorites” menu useful, or a menu collecting tools for a specific project. To create a new menu:

1)  On the Menus tab of the Customize dialog, click the symbol next to Target and select Add in the drop-down list (Figure 21) to display the New Menu dialog (Figure 22).

Figure 21: Location of command to add a new menu

Image18

2)  Type a name for the new menu in the Menu name box.

3)  Use the up and down arrow buttons to move the new menu into the required position on the Menu bar.

4)  Click OK to save and return to the Customize dialog.

The new menu now appears on the list of menus in the Customize dialog. It will appear on the Menu bar itself after you save your customizations.

After creating a new menu, you need to add some commands to it, as described above for modifying a menu.

Figure 22: Adding a new menu

Figura2

Customizing toolbars

You can customize toolbars in several ways, including choosing which icons are visible and locking the position of a docked toolbar (as described in Chapter 1, Introducing Writer), and adding or deleting icons (commands) in the list of those available on a toolbar. You can also create new toolbars.

Modifying existing toolbars

The procedures for creating and modifying a toolbar are similar to those for menus.

1)  Choose Tools > Customize on the Menu bar.

2)  On the Toolbars tab of the Customize dialog (Figure 23), in the Scope drop-down list on the upper right, choose whether to save this changed toolbar for Writer or for a selected document.

3)  In the Target drop-down list, select the toolbar that you want to customize. The current toolbar content is displayed in the Assigned Commands list.

4)  Select a command in the Available Commands list on the left. You can narrow your search by using the Search box on the top left or choosing a category in the drop-down list just below.

5)  Click on the large right arrow to add the selected command to the Assigned Commands list for the toolbar (on the right). Use the up and down arrows in the far right to position the command in the toolbar.

6)  To remove a command from a toolbar, select it in the Assigned Commands list on the right and click the large left arrow.

7)  To show or hide a command assigned to a toolbar, select or clear the checkbox by its icon in the Assigned Commands list on the right.

8)  To insert a separator, select the item directly before where you want the separator to appear, and use the command in the Insert drop-down.

9)  To rename a toolbar item, select it in the Assigned Commands list and choose Rename in the Modify drop-down.

When you have finished making all your changes, click OK to save them.

Figure 23: The Toolbars tab of the Customize dialog

Image10

Creating a new toolbar

To create a new toolbar:

1)  Choose Tools > Customize on the Menu bar.

2)  On the Toolbars tab of the Customize dialog, click the symbol next to Target and select Add in the list, to display the Name dialog.

3)  On the Name dialog, type the new toolbar's name and choose in the Save In drop-down list where to save this new toolbar: for Writer or for a selected document.

The new toolbar now appears on the list of toolbars in the Customize dialog. After creating a new toolbar, you need to add some commands to it, as described above.

Choosing icons for toolbar commands

Toolbar buttons usually have icons, not words, on them, but not all of the commands have associated icons. If the command does not have an icon, you can choose an icon for it. To choose an icon, select the command in the list on the right, and click Modify > Change Icon. On the Change Icon dialog (Figure 24), scroll through the available icons, select one, and click OK to assign it to the command.

To use a custom icon, create it in a graphics program and import it into LibreOffice by clicking the Import button on the Change Icon dialog. Custom icons should be 16×16 pixels in size to achieve the best quality and should not contain more than 256 colors.

Figure 24: Change Icon dialog

Image15

Customizing the user interface

By default, LibreOffice Writer’s commands are grouped in cascading menus and in toolbars filled with icons—the standard user interface described in Chapter 1. In addition, Writer provides other user interface variations, displaying contextual groups of commands and contents. These are described in Chapter 21, User Interface Variants.

When you set up Writer, you can choose one of these user interfaces, and you can switch between them and the standard interface at any time.

In three variants (Tabbed, Tabbed Compact, and Groupedbar Compact), the area at the top of the workspace is divided into tabs, where each tab displays a set of icons grouped by context. The context can change depending on the object selected in the document, for example a table or an image.

After one of these variants has been selected (using View > User Interface), you can use the checkboxes on the Notebookbar tab of the Customize dialog (Figure 25) to show and hide the individual options on the various tabs that are provided in the Tabbed mode user interface.

Use the Reset button to reset the selected configuration to the default settings.

Figure 25: The Notebookbar tab of the Customize dialog

Image17

Assigning shortcut keys

In addition to using the built-in keyboard shortcuts, you can define others. You can assign shortcuts to standard LibreOffice functions or your own macros and save them for use with Writer or with the entire LibreOffice suite.

To adapt shortcut keys to your needs, use the Keyboard tab of the Customize dialog (Figure 26).

1)  Choose whether to have the shortcut key assignment available in all components of LibreOffice or only in Writer.

2)  Select the desired shortcut key in the Shortcut Keys list at the top of the page.

3)  Select the required function in the Category and Function lists.

4)  Click the Modify button. The selection now appears in the Keys list on the lower right.

5)  Click OK to accept the change.

Repeat as required.

Caution

Avoid reassigning your operating system’s predefined shortcut keys.

Figure 26: Defining keyboard shortcuts for applying styles

Image24

Note

Shortcut keys that are grayed-out in the listing on the Customize dialog, such as F1 and F10, are not available for reassignment.

Saving changes to a file

Changes to the shortcut key assignments can be saved in a keyboard configuration file for use at a later time, so you can create and apply different configurations as needed. To save keyboard shortcuts to a file:

1)  After making keyboard shortcut assignments, click the Save button at the right of the Customize dialog (Figure 26).

2)  On the Save Keyboard Configuration dialog, type a name for the keyboard configuration file in the File name box, or select an existing file from the list. Browse to the location where you want to save the file. (The file extension is .cfg for Configuration.)

3)  Click Save. A confirmation dialog appears if you are about to overwrite an existing file, otherwise there will be no feedback and the file will be saved.

Loading a saved keyboard configuration

To load a saved keyboard configuration file and replace your existing configuration, click the Load button on the Customize dialog, and then select the configuration file on the Load Keyboard Configuration dialog.

Resetting the shortcut keys

To reset all of the keyboard shortcuts to their default values, click the Reset button on the Customize dialog. Use this feature with care; no confirmation dialog will be displayed.

Assigning macros to events

In LibreOffice, when something happens, we say that an event occurred. For example, a document is opened, a key is pressed, or the mouse moved. You can associate a macro with an event, so the macro is run when the event occurs. For example, a common use is to assign the “open document” event to run a macro that performs certain setup tasks for the document.

To associate a macro with an event, use the Events tab of the Customize dialog. For more information, see the Getting Started Guide.

Adding functionality with extensions

An extension is a package that can be installed into LibreOffice to add new functionality. Template sets, spelling dictionaries, clipart galleries, macros, and dialog libraries can be packaged as LibreOffice extensions. They can add new top-level menus, submenus or toolbar icons. Extensions may also have their own settings, available from the extension manager.

Several extensions are shipped bundled with LibreOffice and are installed with the program. These can only be removed by changing the installation options. Others can be downloaded from various websites. The official extension repository is located at https://extensions.libreoffice.org/. These extensions are free of charge.

Some extensions from other sources are free of charge; others are available for a fee. Check the descriptions to see what licenses and fees apply to the ones that interest you.

Download the extension to your computer in any folder that you want (usually folder Download).

Installing extensions

To install an extension that is listed in the repository, follow these steps:

1)  In LibreOffice, select Tools > Extension Manager on the Menu bar.

2)  In the Extension Manager dialog (Figure 27), click Get more extensions online.

3)  An internet browser window opens. Find and select the extension you want to install and download it to your computer.

4)  After the extension is downloaded and saved, return to the Extension Manager dialog and click Add. Find and select the extension you want to install and click Open. The extension begins installing. You may be asked to accept a license agreement.

5)  When the installation is complete, the extension is listed in the Extension Manager dialog.

To install an extension that is not listed in the repository, download the extension, then continue with step 3 above.

Updating extensions

Click the Check for Updates button on the Extension Manager dialog to check for updates to installed extensions.

Figure 27: Using the Extension Manager

Image22

Removing and disabling extensions

To remove (uninstall) an extension that you installed, select the extension in the main window of the Extension Manager dialog and click the Remove button.

To disable an extension without removing (uninstalling) it, select the extension in the main window of the Extension Manager dialog and click the Disable button, which then changes to Enable.

Adding fonts

LibreOffice supports PostScript (.pfb), TrueType (.ttf), and OpenType (.otf) font file formats. Other font formats exist, and may be supported by your operating system, but these formats may be limited in selection and quality.

If you have administration privileges, you can install additional fonts through your operating system; they will then be available for use by LibreOffice and will appear in Writer’s font lists.

Finding free-licensed fonts

In addition to proprietary fonts from sources like Adobe, hundreds of free-licensed fonts are available. You can use, share, and edit free-licensed fonts as you please. Most are available at no cost. Many are clones or near-variations of classic fonts, but some are original fonts.

Many Linux distributions include a few free-licensed fonts in their package repositories. Other places where you can find free-licensed fonts include The League of Moveable Type (https://www.theleagueofmoveabletype.com/) and the Font Library (https://fontlibrary.org/).

Adding custom colors

To add custom colors to a color palette, for example to exactly match a corporate color scheme, follow this procedure:

1)  Insert any drawing object, such as a square, into any document.

2)  Right-click on the object and choose Area in the context menu.

3)  Go to the Color tab (Figure 28). Under Colors > Palette, choose which palette you wish to add the new color to. Under New, define the new color using RGB or Hex notation, or click the Pick button to select the color on the Pick a Color dialog (Figure 29).

Figure 28: Defining a new color

Image26

4)  Click Add in the lower left corner, enter a name for the new color in the pop-up dialog, and click OK to save.

5)  Delete the drawing object from the document, if it is not needed.

Figure 29: Defining a color by picking it from a color chart

Image27

Contents